1100 aluminum alloy introduction
Hliník 1100 is one of the most widely used alloys,používá se v oblastech, které nevyžadují vysokou pevnost, jako jsou zařízení pro manipulaci a skladování potravin a chemikálií, výrobky z plechu, hollow hardware processed by drawing and spinning, welding combination keys, reflektory, jmenovky, atd.
Huawei 1100 hliníková slitina
1100 aluminum alloy is an ordinary industrial pure aluminum with an aluminum content of 99.0%. The strength is low, but it has good ductility, formability, svařitelnost a odolnost proti korozi. It can be hardened by cold working, but not by heat treatment; po eloxování, its corrosion resistance can be further improved, and at the same time, a beautiful surface can be obtained.
The surface of Huawei 1100 aluminum is beautiful without obvious blemishes.
hliníková slitina 1100 datasheet
Hliníková slitina 1100 chemické složení
Živel | Hliník (Al) | Silcon(A) + Železo(Fe) | Měď (Cu) | Zinek (Zn) | Mangan (Mn) | Beryllium (Be) |
Obsah(%) | 99.00 | ≤ 0.95 | ≤ 0.20% | ≤ 0.10 | ≤ 0.50 | ≤ 0.0008 |
Hliníková slitina 1100 physical properties
Properties | Metrický | English |
Hustota | 2.71 g/cc | 0.0979 lb/in³ |
Melting Point | 643 – 657.2 °C | 1190 – 1215 °F |
The density of aluminum alloy 1100 is 2.71g/cm3. It belongs to the standard density of pure aluminum. Hustota 1100 aluminum is relatively low. It can be regarded as a medium-density aluminum plate.
1100 hliníková fólie
Mechanical properties of aluminum alloy 1100
Properties | Metrický | English |
Tvrdost, Brinell | 23 | 23 |
Pevnost v tahu, konečný | 89.6 MPa | 13000 psi |
Pevnost v tahu, Výtěžek | 34.0 MPa | 4930 psi |
Prodloužení při přestávce | 15 – 28% | 15 – 28% |
Modul pružnosti | 68.9 GPa | 103000 ksi |
Ultimate Bearing Strength | 159 MPa | 23100 psi |
1100 Aluminum Yield Strength | 55.0 MPa | 7980 psi |
Pevnost v tahu, konečný | 89.6 MPa | 13000 psi |
Poměr Ryb | 0.33 | 0.33 |
Fatigue Strength | 34.5 MPa | 5000 psi |
Modul smyku | 26.0 MPa | 3770 psi |
Pevnost ve smyku | 62.1 MPa | 9000 psi |
Thermal properties of 1100 alloy aluminum
Properties | Metrický | English |
Heat of Fusion | 390 J/g | 168 BTU/lb |
Specific Heat Capacity | 0.904 J/g-°C | 0.216 BTU/lb-°F |
Thermal Conductivity | 222 W/m-K | 1540 BTU-in/hr-ft²-°F |
Data Sources:https://alloysintl.com/inventory/aluminum-alloys/aluminum-1100/
Hliník 1100 equivalent
1100 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-1100. A91100 is the UNS number. Additionally, the EN chemical designation is Al99,0Cu.
- Al99.0Cu
- A91100
- ASTM B209
- ASTM B210
- ASTM B211
- ASTM B221
- ASTM B483
- ASTM B491
- ASTM B547
Production standards:GB/T 3190-2008
1100 Aluminum Alloy Specification
Slitina | 1100 hliníková slitina |
Zmírnit | Ó,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38. |
Tloušťka | 0.1-500 mm |
Šířka | 20-2600 mm |
Délka | 500-16000 mm |
Aplikace | Printed plates, výměníky tepla, kuchyňské potřeby, deep-drawing materials, uzávěry lahví, wide-width building curtain walls, bus interiors, bus doors/engine panels, dekorace, aluminum-plastic panels, předstěny, aluminum busbars, aluminum for transformers, chladiče, atd. |
Features of 1100 Hliníková slitina
- A: Like all 1000 série hliníkových slitin, it has strong electrical conductivity and thermal conductivity.
- B: Střední síla, good formability, good ductility, and high corrosion resistance.
- C: Strong corrosion resistance, capable of stress corrosion cracking.
- D: Strong weldability, svařování plynem, arc welding, contact spot welding, wire welding, and brazing at the same time.
co je 1100 aluminum used for
1100 aluminum alloy is generally used in heat sinks, uzávěry lahví, printing plates, kuchyňské potřeby, stavební materiály, heat exchanger components, food and chemical handling and storage equipment, výrobky z plechu, hollow hardware processed by drawing and spinning , welding combination keys, reflektory, jmenovky, deep-drawing products, atd.
1100 aluminum alloy for kitchen
1100 hot-rolled aluminum applications: deep-drawing materials, uzávěry lahví, wide-width building curtain walls, bus interiors, bus doors/engine panels, dekorace, aluminum busbars, aluminum for transformers, chladiče, atd.;
1100 aluminum foil coil applications: aluminum-plastic panels, electronic foil, battery foil, atd.;
1100 vs 1060 hliníková slitina
Different composition | The composition of 1100 hliník a 1060 aluminum is different. 1100 aluminum is composed of aluminum and other alloying elements, such as copper, zinek, mangan, atd., and its aluminum content is more than 99.00%. 1060 hliník is composed of more than 99.60% aluminum and a small amount of other alloying elements. |
Different performance | The tensile strength of 1100 aluminum is higher than that of 1060 hliník, and the compressive strength is also higher. Navíc, 1100 aluminum is also more resistant to corrosion, with a brighter surface finish and a longer service life. The tensile strength and compressive strength of 1060 aluminum are lower than that of 1100 hliník, its corrosion resistance is also weaker than that of 1100 hliník, its surface gloss is not as good as that of 1100 hliník, and its service life is also shorter. |
Different uses | Due to its excellent performance, 1100 aluminum can be widely used in construction, automobil, home appliance, nábytek, obal, lamps and other industries, and can be used to make various types of aluminum products. Však, due to its low tensile strength and compressive strength, 1060 aluminum is generally used to make aluminum products that do not require high strength, such as aluminum foil, kitchen pots, atd. |
Different prices | Ceny 1100 hliník a 1060 aluminum are also different. Because 1100 aluminum has higher tensile strength, compressive strength, corrosion and corrosion resistance, its price is also much higher than that of 1060 hliník. |
1100 aluminum plate alloy packaging and delivery
1100 aluminum alloy sheet packaged
- 1. Carry out paper clipping or film coating on the aluminum plate to ensure that the surface of the aluminum plate is intact without scratches;
- 2. Plastic or kraft paper packages are used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during transportation (each package has a moisture-proof desiccant to ensure the quality of our products in the rainy East and South China regions);
- 3. Install wooden pallets and reinforce them with steel strips to avoid collisions during transportation and ensure that the geometric shape of the aluminum plate remains unchanged;
- 4. Export products are packed in wooden boxes and brackets with fumigation marks;
- 5. Pack according to other packaging requirements of customers;
Zanechat odpověď