Ano ang 1060 aluminyo haluang metal

1060 aluminum alloy contains 99.6% aluminyo, which belongs to industrial pure aluminum and is a representative product of 1000 serye aluminyo haluang metal.

1060 aluminyo haluang metal

1060 aluminum material is formed by pure aluminum plus a small amount of copper elements. It has high plasticity, paglaban sa kaagnasan, electrical conductivity and thermal conductivity, but its strength is low, heat treatment cannot be strengthened, and its machinability is not good; it can be welded by gas welding, hydrogen atom welding and Contact welding, not easy to braze; easy to withstand various pressure processing and extension, pagbaluktot.

The production process of 1060 aluminum sheet/coil is relatively simple, ang teknolohiya ay medyo mature, and the price has a huge advantage over other high-grade alloy aluminum sheets. With good elongation and tensile strength, it can fully meet the conventional processing requirements (pag stamp ng, pag-unat) and high formability.

Common product types of 1060 aluminyo haluang metal

1060 aluminyo sheet	1060 aluminyo likawin	1060 aluminyo strip	1060 bilog ng aluminyo	1060 aluminyo foil

1060 aluminum alloy is widely used in products that do not require high strength, such as billboards, building exterior decoration, bus body, chemical instruments, sheet metal processing parts, deep-drawing or rotating concave containers, mga bahagi ng hinang, mga heat exchanger, watch surfaces And disk surfaces, mga nameplate, kitchen utensils, decorations, reflective appliances, atbp.

What is the meaning of 1060 H14

1060 represents the alloy composition, which can be considered as the grade of aluminum;

H14 is the heat treatment state of the aluminum alloy. The same alloy composition has different heat treatment states, and its mechanical properties are different;

1060 h14 aluminium alloy coil

Aluminium 1060 komposisyon ng kemikal

1060 aluminium alloy chemical composition

haluang metal	Al(%)	Si Si (%)	Cu (%)	Mg(%)	Zn (%)	Mn(%)	Ti(%)	V (%)	Fe(%)
1060	99.60	0.25	0.05	0.03	0.05	0.03	0.03	0.05	0.350

1060 aluminium alloy properties

1060 aluminium alloy properties

Pag-aari	Value in metric unit		Value in US unit
1060 Aluminium alloy density	2.705 *10³	kg/m2	169	lb/ft³
Modulus of elasticity	69	GPa	10000	ksi
Thermal expansion (20 ºC)	23.6*10-6	ºCˉ¹	13.1*10-6	in/(in* ºF)
Specific heat capacity	900	J/(kg*K)	0.215	BTU/(lb*ºF)
Thermal conductivity	231	W/(m*K)	1600	BTU*in/(hr*ft²*ºF)
Electric resistivity	2.81*10-8	Ohm*m	2.81*10-6	Ohm*cm
Lakas ng paghatak (annealed)	69	MPa	10000	psi
Magbunga ng lakas (annealed)	28	MPa	4000	psi
Pagpapahaba (annealed)	43	%	43	%
Shear strength (annealed)	48	MPa	7000	psi
Fatigue strength (annealed)	21	MPa	3000	psi
Hardness (annealed)	19	HB	19	HB
Lakas ng paghatak (H16)	110	MPa	16000	psi
Magbunga ng lakas (H16)	103	MPa	15000	psi
Pagpapahaba (H16)	8	%	8	%
Shear strength (H16)	69	MPa	10000	psi
Fatigue strength (H16)	45	MPa	6500	psi
Hardness (H16)	30	HB	30	HB
Annealing temperature	343	ºC	650	ºF

Data Sources:1060 aluminum alloy wiki

Aluminium 1060 equivalent

It is fundamentally very similar to 1050 aluminyo haluang metal, with the difference coming down to 0.1% aluminium by weight. Gayunpaman, while both 1050 at 1060 are covered by the same ISO standard, they are covered by different ASTM standards.

ASTM B209	ASTM B210	ASTM B211	ASTM B221
ASTM B234	ASTM B241	ASTM B345	ASTM B361
ASTM B404	ASTM B483	ASTM B548	SAE J454
UNS A91060

Alternative names include Al99.6 and A91060. It is described in the following standards:

ASTM B 209: Standard Specification for Aluminum and Aluminum Alloy Sheet and Plate

ASTM B 210: Standard Specification for Drawn Seamless Tubing of Aluminum and Aluminum Alloys

ASTM B 211: Standard Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire

ASTM B 221: Standard Specification for Aluminum and Aluminum Alloy Extruded Rods, Rods, Wire, Shapes, and Tubes

ASTM B 483: Standard Specification for Aluminum and Aluminum Alloy Drawn Tubing for General Applications

ISO 6361: Wrought aluminum and aluminum alloy sheet, strip and plate

Naka package na 1060 aluminyo sheet

Heat treatment process of aluminum 1060

Rapid annealing: heating temperature 350～410℃;

According to the effective thickness of the material, the holding time is between 30 at 120 minutes; air-cooled or water-cooled.

High temperature annealing: heating temperature 350～500℃;

When the thickness of the finished product is ≥ 6mm, the holding time is 10-30 minutes, and when it is less than 6mm, heat it to pass; air cooling.

Low temperature annealing: heating temperature 150~250℃; holding time 2~3h; air cooling or water cooling.

1060 aluminum alloy suppliers

Henan Huawei Aluminyo Co., Ltd. focuses on the R&D and production of hot-rolled 1060 aluminum sheets. 1060 aluminum sheets have high elongation, tensile strength, excellent electrical conductivity, and high formability, which can fully meet conventional processing requirements (pag stamp ng, pag-unat).

Huawei Aluminum’s ultra-wide and ultra-thick 1060 plato ng aluminyo, the internal stress is eliminated, the cutting does not deform, the maximum width is 2650mm, and the maximum thickness is 500mm. It is a rare manufacturer in China that can produce ultra-wide and ultra-thick aluminum plates.

What 1060 aluminum can we provide

• 1060 aluminyo sheet: Lapad ng katawan(),Haba(),thickness（）；
• 1060 aluminyo likawin：
• 1060 aluminyo strip：
• 1060 aluminyo foil：
• 1060 bilog ng aluminyo：

1060 bilog ng aluminyo

Characteristics of 1060 plato ng aluminyo

• 1. The material density of 1060 aluminum plate is low, electrical kondaktibiti, thermal kondaktibiti, paglaban sa kaagnasan, good plasticity, can be processed into plates, mga guhit, foils at extruded mga produkto, atbp., and can be welded, welded and spot welded. Pamantayan 1060 pure aluminum sheet contains more than 99.60% aluminyo. It belongs to the 1000 series aluminum alloy and is a commonly used flat aluminum.
• 2. The material of 1060 aluminum sheet has some good physical properties and high plasticity, which means that 1060 aluminum sheet can withstand strict mechanical processing and can be shaped according to different needs. Napakahusay na paglaban sa kaagnasan.
• 3. Bukod pa rito, the advantage of 1060 aluminum plate material is also used to accommodate corrosive or chemical liquids. Kaya nga, combined with its lightweight metal properties, 1060 aluminum plate is an ideal chemical container.
• 4. Good thermal conductivity and electrical conductivity. Ang 1060 aluminum plate is high enough to be used in power equipment such as aluminum busbars. The conductivity of aluminum is second only to copper, and its weight is only 1/3 of that of copper.

1060 aluminum alloy applications and usage

1060 aluminum is often used in lithium battery flexible connections, busbars, road signs, charging piles, aluminum gaskets, billboard building exterior decoration, high-rise and factory exterior decoration, office lattice decoration, lamp holders, fan blades, electronic parts, kitchen utensils , Reflective appliances and other fields.

• Power battery soft connection
• Aluminum for busbar
• Indoor decorations
• Curtain wall panel

1060 aluminium sheet / plate / coil / foil applications

Paglalapat ng 1060 aluminyo sheet: battery flexible connection, bus interior decoration, mga bahagi ng auto, aluminum-plastic panels, signs, lamps, wide curtain walls, bus luggage racks/floors/pattern plates (used by Yutong), atbp.;

Paglalapat ng 1060 medium-thick aluminum plate: aluminum busbar, automobile radiator, new energy vehicle charging pile, mold, atbp.;

Paglalapat ng 1060 aluminum foil coil: aluminum foil gasket, packaging ng pagkain, electronic label, aluminum foil for automobile heat shield, battery foil, battery soft connection, battery ear material, battery explosion-proof valve, atbp.;

1060-O state aluminum application: automotive heat shield, electronic label, battery soft connection, battery tab material, aluminum foil for battery explosion-proof valve, atbp.;