1100 aluminum alloy introduction
Aluminyo 1100 is one of the most widely used alloys,ginagamit sa mga patlang na hindi nangangailangan ng mataas na lakas, tulad ng pagkain at kemikal handling at storage equipment, mga produkto ng sheet metal, hollow hardware processed by drawing and spinning, welding combination keys, mga reflector, mga nameplate, atbp.
Huawei 1100 aluminyo haluang metal
1100 aluminum alloy is an ordinary industrial pure aluminum with an aluminum content of 99.0%. The strength is low, but it has good ductility, pagiging formable, weldability at kaagnasan paglaban. It can be hardened by cold working, but not by heat treatment; after anodizing, its corrosion resistance can be further improved, and at the same time, a beautiful surface can be obtained.
The surface of Huawei 1100 aluminum is beautiful without obvious blemishes.
aluminyo haluang metal 1100 datasheet
Aluminyo haluang metal 1100 komposisyon ng kemikal
| Elemento | Aluminyo (Al) | Silcon(Si Si) + Bakal na Bakal(Fe) | Tanso (Cu) | Sink (Zn) | Mga mangganeso (Mn) | Beryllium (Be) |
| Nilalaman(%) | 99.00 | ≤ 0.95 | ≤ 0.20% | ≤ 0.10 | ≤ 0.50 | ≤ 0.0008 |
Aluminyo haluang metal 1100 physical properties
| Properties | Metric | English |
| Densidad ng katawan | 2.71 g/cc | 0.0979 lb/in³ |
| Melting Point | 643 – 657.2 °C | 1190 – 1215 °F |
The density of aluminum alloy 1100 is 2.71g/cm3. It belongs to the standard density of pure aluminum. Ang density ng 1100 aluminum is relatively low. It can be regarded as a medium-density aluminum plate.
1100 aluminyo foil
Mechanical properties of aluminum alloy 1100
| Properties | Metric | English |
| Hardness, Brinell | 23 | 23 |
| Lakas ng Paghatak, Ultimate | 89.6 MPa | 13000 psi |
| Lakas ng Paghatak, Yield | 34.0 MPa | 4930 psi |
| Pagpapahaba sa Break | 15 – 28% | 15 – 28% |
| Modulus ng Pagkalastiko | 68.9 GPa | 103000 ksi |
| Ultimate Bearing Strength | 159 MPa | 23100 psi |
| 1100 Aluminum Yield Strength | 55.0 MPa | 7980 psi |
| Lakas ng Paghatak, Ultimate | 89.6 MPa | 13000 psi |
| Poissons Ratio | 0.33 | 0.33 |
| Fatigue Strength | 34.5 MPa | 5000 psi |
| Shear Modulus | 26.0 MPa | 3770 psi |
| Lakas ng Paggupit | 62.1 MPa | 9000 psi |
Thermal properties of 1100 alloy aluminum
| Properties | Metric | English |
| Heat of Fusion | 390 J/g | 168 BTU/lb |
| Specific Heat Capacity | 0.904 J/g-°C | 0.216 BTU/lb-°F |
| Thermal Conductivity | 222 W/m-K | 1540 BTU-in/hr-ft²-°F |
Data Sources：https://alloysintl.com/inventory/aluminum-alloys/aluminum-1100/
Aluminium 1100 equivalent
1100 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-1100. A91100 is the UNS number. Additionally, the EN chemical designation is Al99,0Cu.
- Al99.0Cu
- A91100
- ASTM B209
- ASTM B210
- ASTM B211
- ASTM B221
- ASTM B483
- ASTM B491
- ASTM B547
Production standards：GB/T 3190-2008
1100 Aluminum Alloy Specification
| haluang metal | 1100 aluminyo haluang metal |
| Temper | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38. |
| Ang kapal | 0.1-500 mm |
| Lapad ng katawan | 20-2600 mm |
| Haba | 500-16000 mm |
| Paglalapat | Printed plates, mga heat exchanger, mga kagamitan sa pagluluto, deep-drawing materials, mga takip ng bote, wide-width building curtain walls, bus interiors, bus doors/engine panels, dekorasyon, aluminum-plastic panels, mga pader ng kurtina, aluminum busbars, aluminum for transformers, heat sinks, atbp. |
Features of 1100 aluminyo haluang metal
- A: Like all 1000 serye aluminyo alloys, it has strong electrical conductivity and thermal conductivity.
- B: Medium strength, good formability, good ductility, and high corrosion resistance.
- C: Strong corrosion resistance, capable of stress corrosion cracking.
- D: Strong weldability, gas welding, arc welding, contact spot welding, wire welding, and brazing at the same time.
Ano ang 1100 aluminum used for
1100 aluminum alloy is generally used in heat sinks, mga takip ng bote, printing plates, mga kagamitan sa pagluluto, mga materyales sa gusali, heat exchanger components, food and chemical handling and storage equipment, mga produkto ng sheet metal, hollow hardware processed by drawing and spinning , welding combination keys, mga reflector, mga nameplate, deep-drawing products, atbp.
1100 aluminum alloy for kitchen
1100 hot-rolled aluminum applications: deep-drawing materials, mga takip ng bote, wide-width building curtain walls, bus interiors, bus doors/engine panels, dekorasyon, aluminum busbars, aluminum for transformers, heat sinks, atbp.;
1100 aluminum foil coil applications: aluminum-plastic panels, electronic foil, battery foil, atbp.;
1100 mga bes 1060 aluminyo haluang metal
| Different composition | The composition of 1100 aluminyo at 1060 aluminum is different. 1100 aluminum is composed of aluminum and other alloying elements, tulad ng tanso, sink, mangganeso, atbp., and its aluminum content is more than 99.00%. 1060 aluminyo is composed of more than 99.60% aluminum and a small amount of other alloying elements. |
| Different performance | The tensile strength of 1100 aluminum is higher than that of 1060 aluminyo, and the compressive strength is also higher. Bukod pa rito, 1100 aluminum is also more resistant to corrosion, with a brighter surface finish and a longer service life. The tensile strength and compressive strength of 1060 aluminum are lower than that of 1100 aluminyo, its corrosion resistance is also weaker than that of 1100 aluminyo, its surface gloss is not as good as that of 1100 aluminyo, and its service life is also shorter. |
| Different uses | Due to its excellent performance, 1100 aluminum can be widely used in construction, sasakyan, home appliance, mga kasangkapan sa bahay, pag iimpake, lamps and other industries, and can be used to make various types of aluminum products. Gayunpaman, due to its low tensile strength and compressive strength, 1060 aluminum is generally used to make aluminum products that do not require high strength, such as aluminum foil, kitchen pots, atbp. |
| Different prices | Ang mga presyo ng 1100 aluminyo at 1060 aluminum are also different. Dahil 1100 aluminum has higher tensile strength, compressive strength, corrosion and corrosion resistance, its price is also much higher than that of 1060 aluminyo. |
1100 aluminum plate alloy packaging and delivery
1100 aluminum alloy sheet packaged
- 1. Carry out paper clipping or film coating on the aluminum plate to ensure that the surface of the aluminum plate is intact without scratches;
- 2. Plastic or kraft paper packages are used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during transportation (each package has a moisture-proof desiccant to ensure the quality of our products in the rainy East and South China regions);
- 3. Install wooden pallets and reinforce them with steel strips to avoid collisions during transportation and ensure that the geometric shape of the aluminum plate remains unchanged;
- 4. Export products are packed in wooden boxes and brackets with fumigation marks;
- 5. Pack according to other packaging requirements of customers;
Mag iwan ng Tugon