1100 aluminum alloy introduction
Alluminio 1100 is one of the most widely used alloys,used in fields that do not require high strength, such as food and chemical handling and storage equipment, sheet metal products, hollow hardware processed by drawing and spinning, welding combination keys, riflettori, targhette, ecc.
Huawei 1100 lega di alluminio
1100 aluminum alloy is an ordinary industrial pure aluminum with an aluminum content of 99.0%. The strength is low, but it has good ductility, formabilità, saldabilità e resistenza alla corrosione. It can be hardened by cold working, but not by heat treatment; dopo l'anodizzazione, la sua resistenza alla corrosione può essere ulteriormente migliorata, and at the same time, a beautiful surface can be obtained.
The surface of Huawei 1100 aluminum is beautiful without obvious blemishes.
aluminium alloy 1100 datasheet
Lega di alluminio 1100 composizione chimica
| Elemento | Alluminio (Al) | Silcon(E) + Ferro(Fe) | Rame (Cu) | Zinco (Zn) | Manganese (Mn) | Beryllium (Be) |
| Contenuto(%) | 99.00 | ≤ 0.95 | ≤ 0.20% | ≤ 0.10 | ≤ 0.50 | ≤ 0.0008 |
Lega di alluminio 1100 physical properties
| Properties | Metric | English |
| Densità | 2.71 g/cc | 0.0979 libbre/pollici³ |
| Melting Point | 643 – 657.2 °C | 1190 – 1215 °F |
The density of aluminum alloy 1100 is 2.71g/cm3. It belongs to the standard density of pure aluminum. La densità di 1100 aluminum is relatively low. It can be regarded as a medium-density aluminum plate.
1100 foglio di alluminio
Mechanical properties of aluminum alloy 1100
| Properties | Metric | English |
| Durezza, Brinell | 23 | 23 |
| Resistenza alla trazione, Ultimate | 89.6 MPa | 13000 psi |
| Resistenza alla trazione, Yield | 34.0 MPa | 4930 psi |
| Allungamento a rottura | 15 – 28% | 15 – 28% |
| Modulo di elasticità | 68.9 GPa | 103000 ksi |
| Ultimate Bearing Strength | 159 MPa | 23100 psi |
| 1100 Aluminum Yield Strength | 55.0 MPa | 7980 psi |
| Resistenza alla trazione, Ultimate | 89.6 MPa | 13000 psi |
| Poissons Ratio | 0.33 | 0.33 |
| Fatigue Strength | 34.5 MPa | 5000 psi |
| Shear Modulus | 26.0 MPa | 3770 psi |
| Resistenza al taglio | 62.1 MPa | 9000 psi |
Thermal properties of 1100 alloy aluminum
| Properties | Metric | English |
| Heat of Fusion | 390 J/g | 168 BTU/lb |
| Specific Heat Capacity | 0.904 J/g-°C | 0.216 BTU/lb-°F |
| Conducibilità termica | 222 W/m-K | 1540 BTU-in/hr-ft²-°F |
Data Sources：https://alloysintl.com/inventory/aluminum-alloys/aluminum-1100/
Aluminium 1100 equivalent
1100 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-1100. A91100 is the UNS number. Additionally, the EN chemical designation is Al99,0Cu.
- Al99.0Cu
- A91100
- ASTM B209
- ASTM B210
- ASTM B211
- ASTM B221
- ASTM B483
- ASTM B491
- ASTM B547
Production standards：GB/T 3190-2008
1100 Aluminum Alloy Specification
| Lega | 1100 lega di alluminio |
| Temperare | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38. |
| Spessore | 0.1-500 mm |
| Larghezza | 20-2600 mm |
| Lunghezza | 500-16000 mm |
| Applicazione | Printed plates, scambiatori di calore, utensili da cucina, deep-drawing materials, tappi di bottiglia, wide-width building curtain walls, bus interiors, bus doors/engine panels, decoration, aluminum-plastic panels, facciate continue, aluminum busbars, aluminum for transformers, dissipatori di calore, ecc. |
Features of 1100 Lega di alluminio
- UN: Like all 1000 leghe di alluminio di serie, it has strong electrical conductivity and thermal conductivity.
- B: Medium strength, buona formabilità, good ductility, and high corrosion resistance.
- C: Strong corrosion resistance, capable of stress corrosion cracking.
- D: Strong weldability, saldatura a gas, arc welding, contact spot welding, wire welding, and brazing at the same time.
Cosa è 1100 aluminum used for
1100 aluminum alloy is generally used in heat sinks, tappi di bottiglia, printing plates, utensili da cucina, materiali da costruzione, heat exchanger components, food and chemical handling and storage equipment, sheet metal products, hollow hardware processed by drawing and spinning , welding combination keys, riflettori, targhette, deep-drawing products, ecc.
1100 aluminum alloy for kitchen
1100 hot-rolled aluminum applications: deep-drawing materials, tappi di bottiglia, wide-width building curtain walls, bus interiors, bus doors/engine panels, decoration, aluminum busbars, aluminum for transformers, dissipatori di calore, ecc.;
1100 aluminum foil coil applications: aluminum-plastic panels, electronic foil, battery foil, ecc.;
1100 contro 1060 lega di alluminio
| Different composition | The composition of 1100 alluminio e 1060 aluminum is different. 1100 aluminum is composed of aluminum and other alloying elements, come il rame, zinco, manganese, ecc., and its aluminum content is more than 99.00%. 1060 alluminio is composed of more than 99.60% aluminum and a small amount of other alloying elements. |
| Different performance | The tensile strength of 1100 aluminum is higher than that of 1060 alluminio, and the compressive strength is also higher. Inoltre, 1100 aluminum is also more resistant to corrosion, with a brighter surface finish and a longer service life. The tensile strength and compressive strength of 1060 aluminum are lower than that of 1100 alluminio, its corrosion resistance is also weaker than that of 1100 alluminio, its surface gloss is not as good as that of 1100 alluminio, and its service life is also shorter. |
| Different uses | Due to its excellent performance, 1100 aluminum can be widely used in construction, automobile, home appliance, mobilia, confezione, lamps and other industries, and can be used to make various types of aluminum products. Tuttavia, due to its low tensile strength and compressive strength, 1060 aluminum is generally used to make aluminum products that do not require high strength, such as aluminum foil, kitchen pots, ecc. |
| Different prices | I prezzi di 1100 alluminio e 1060 aluminum are also different. Perché 1100 aluminum has higher tensile strength, compressive strength, corrosion and corrosion resistance, its price is also much higher than that of 1060 alluminio. |
1100 aluminum plate alloy packaging and delivery
1100 aluminum alloy sheet packaged
- 1. Carry out paper clipping or film coating on the aluminum plate to ensure that the surface of the aluminum plate is intact without scratches;
- 2. Plastic or kraft paper packages are used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during transportation (each package has a moisture-proof desiccant to ensure the quality of our products in the rainy East and South China regions);
- 3. Install wooden pallets and reinforce them with steel strips to avoid collisions during transportation and ensure that the geometric shape of the aluminum plate remains unchanged;
- 4. Export products are packed in wooden boxes and brackets with fumigation marks;
- 5. Pack according to other packaging requirements of customers;
Lascia una risposta