標準: GB/T3190-1996
●Chemical composition:
シリコンはい: 0.35
鉄 Fe: 0.6
銅Cu: 0.10
マンガンMn: 0.05
マグネシウム Mg: 0.05
亜鉛亜鉛: 0.10
バナジウム V: 0.05
アルミニウムアルミニウム: 99.35
Other: 0.03
●機械的性質:
引張強さσb (MPa) )75以上
Conditional yield strength σ0.2 (MPa) )≥35
注記: Longitudinal mechanical properties of pipe at room temperature
●Main features and scope of application:
工業用純アルミニウムは高い可塑性を持っています, 耐食性, good electrical conductivity and thermal conductivity, but low strength and impenetrable
Strengthened by heat treatment, 加工性が悪い, 許容可能な接触溶接, ガス溶接. Make more use of its advantages to make some tools
Structural parts with specific properties, such as gaskets and capacitors made of aluminum foil, electronic tube isolation nets, wires, cables
Protective cover, net, wire core and aircraft ventilation system parts and decorations; 1035 aluminum alloy is industrial pure aluminum,
Has high plasticity, 耐食性, 電気伝導率と熱伝導率, but low strength, heat treatment can not strengthen the cut
Poor machinability; ガス溶接, 水素原子溶接と接触溶接, ろう付けが容易ではない; 様々な圧力加工や伸長に耐えやすい,
曲げ.
●Heat treatment process:
1) 急速アニーリング: heating temperature is 350-410°C; 材料の有効厚さに応じて, the holding time is between 30-120min; air or water cooling.
2) High-temperature annealing: heating temperature 350-500°C; when the thickness of the finished product is ≥6mm, the holding time is 10-30min;
3) Low temperature annealing: heating temperature 150-250°C; holding time 2-3h; air or water cooling
返信を残す