標準: GB/T3190-1996

●1060 chemical composition:

シリコンはい: 0.25
鉄 Fe: 0.35
銅Cu: 0.05
マンガンMn: 0.03
マグネシウム Mg: 0.03
亜鉛亜鉛: 0.05
チタンチタン: 0.03
バナジウム V: 0.05
アルミニウムアルミニウム: 99.6

●Mechanical properties of aluminum 合金 1060:

引張強さσb (MPa) 75以上
Conditional yield strength σ0.2 (MPa)≥35
試験片サイズ: すべての壁の厚さ
注記: The longitudinal mechanical properties of the pipe at room temperature are edited for the heat treatment process in this paragraph:

●Main features and application scope of 1060 アルミニウム合金:

工業用純アルミニウムは高い可塑性を持っています, 耐食性, good electrical conductivity and thermal conductivity, but low strength and impenetrable
Strengthened by heat treatment, 加工性が悪い, 許容可能な接触溶接, ガス溶接. Make more use of its advantages to make some tools
Structural parts with specific properties, such as gaskets and capacitors made of aluminum foil, electronic tube isolation nets, wires, cables
Protective sleeves, nets, wire cores and aircraft ventilation system parts and decorations.

●Al 1060 heat treatment process:

急速アニーリング: the heating temperature is 350-410°C; 材料の有効厚さに応じて, the holding time is 30-410°C.
Between 120min; air or water cooling. High temperature annealing: heating temperature 350～500℃; when the thickness of the finished product is ≥6mm,
The heat preservation time is 10-30min, and when the temperature is <6mm, heat through; air-cool. Low temperature annealing: heating temperature 150～
250℃; holding time is 2~3h; air or water cooling