Ketahui lebih lanjut tentang 8021 Kerajang aluminium
“8021 Kerajang aluminium” refers to 8021 alloy aluminum foil, which is a more common alloy type in the 8000 siri. 8021 alloy is a common type of aluminum alloy with high strength and plasticity. Kerajang aluminium 8021 is a thin sheet made of pure aluminum, which has good flexibility, thermal conductivity and electrical conductivity. It is widely used in food packaging, pembungkusan farmaseutikal, battery casing, thermal insulation materials and other fields.
Apakah komposisi 8021 alloy aluminum foil?
Komponen utama 8021 aluminum alloy include alloy additions of aluminum (Al), tembaga (Cu) and a small amount of other elements.
| 8021 aluminum foil chemical element content table (%) | |||||||||
| Aloi | Al | Fe | Si | Cu | Mn | Mg | Sn | B | Lain |
| 8021 | 96.8-98.2 | 0.7 | 0.65 | 1.2-1.8 | 0.15 | 0.01 | 0.05 | 0.05 | 0.15 |
Sifat mekanikal bagi 8021 produk aluminium foil
| Aloi Temper | Kekuatan tegangan | Kekuatan hasil | Pemanjangan | Takat lebur | Kekonduksian terma | Ketumpatan |
| 8021 Wahai kerajang aluminium | ≥80MPa | ≥40MPa | ≥25% | 660°C | 237 W/(m·K) | 2.70 g/cm³ |
| 8021 Kerajang aluminium H12 | 110-145 Mpa | ≥75 MPa | ≥3% | |||
| 8021 kerajang aluminium H14 | 130-175 Mpa | ≥115 MPa | ≥2% | |||
| 8021 Kerajang aluminium H16 | 150-185 Mpa | ≥135 MPa | ≥2% | |||
| 8021 Kerajang aluminium H18 | ≥185 MPa | ≥170 MPa | ≥2% | |||
| 8021 Kerajang aluminium H22 | 130-165 Mpa | ≥115 MPa | ≥3% | |||
| 8021 Kerajang aluminium H24 | 150-180 Mpa | ≥135 MPa | ≥2% |
8021 aluminum foil as pharmaceutical packaging
8021 aluminum foil has good mechanical properties and can be used as a pharmaceutical packaging material.
| Spesifikasi | Range |
|---|---|
| Ketebalan | 0.02mm – 0.2mm |
| Lebar | 200mm – 1600mm |
| Kekerasan | O, H14, H18 |
| Roll Diameter | 200mm – 600mm |
| Surface Treatment | One side bright, possibly with coatings, lubricants, or printing |
8021 aluminum foil as food packaging
| Spesifikasi | parameters |
|---|---|
| Ketebalan | 0.02mm – 0.2mm |
| Lebar | 200mm – 1600mm |
| Kekerasan | O, H12, H14, H16, H18 |
| Roll Diameter | 200mm – 600mm |
| Surface Treatment | One side bright, possibly with coatings or printing |
8021 alloy as a specification for battery foil
| Spesifikasi | parameters |
|---|---|
| Aloi | 8021 |
| perangai | O (lembut) |
| Ketebalan | 0.015mm – 0.05mm |
| Lebar | 100mm – 1000mm |
| Surface Treatment | One side bright, possibly with coatings or treatments |
| Kekuatan tegangan | 60 Mpa – 120 Mpa |
| Pemanjangan | 20% – 30% |
| Kekonduksian Elektrik | Cemerlang |
8021 aluminum foil density
The density of aluminum foil can vary slightly depending on its thickness and manufacturing process. As a general guideline, the density of aluminum is approximately 2.70 g/cm³ atau 2700 kg/m³. 8021 aluminum foil is usually very thin, often less than 0.2 mm (200 mikron) tebal, and its density is close to that of pure aluminum.
8021 aluminum foil melting point
Takat lebur bagi 8021 aluminum foil is the same as that of pure aluminum because 8021 is an alloy mainly composed of aluminum. The melting point of pure aluminum is approximately 660.3 darjah Celsius (1220.5 degrees Fahrenheit).
8021 kerajang aluminium vs 8011 Kerajang aluminium
8021 Dan 8011 aluminum foils are similar in many ways as they both belong to the 8xxx series of aluminum alloys commonly used in a variety of packaging applications.
| Harta benda | 8021 Kertas aluminium | 8011 Kertas aluminium |
|---|---|---|
| Komposisi Aloi | Primarily aluminum with some alloying elements | Primarily aluminum with some alloying elements |
| Siri Aloi | 8xxx (8xxx indicates aluminum alloy series) | 8xxx (8xxx indicates aluminum alloy series) |
| Common Thickness Range | 0.018-0.2 mm (18-200 micrometers) | 0.009-0.2 mm (9-200 micrometers) |
| Typical Use | Pharmaceutical packaging, pembungkusan makanan, dan banyak lagi | Pembungkusan makanan, kegunaan isi rumah, dan banyak lagi |
| Strength and Durability | Generally good strength and durability | Generally good strength and durability |
| Barrier Properties | Excellent barrier properties, suitable for protecting sensitive products | Good barrier properties, adequate for most packaging needs |
| Kemasan Permukaan | Smooth surface finish | Smooth surface finish |
| Surface Treatment | Usually coated or laminated for specific requirements | Coated or laminated for specific requirements |
| perangai | Lembut, half-hard, and hard temper available | Lembut, half-hard, and hard temper available |
| Takat lebur | Approximately 660.3°C (1220.5°F) | Approximately 660.3°C (1220.5°F) |
| Kekuatan tegangan | Varies with temper and thickness | Varies with temper and thickness |
| Typical Temperatures for Use | Can be used at room temperature, refrigeration, and moderate oven temperatures | Can be used at room temperature, refrigeration, and moderate oven temperatures |
Tinggalkan pesanan