Estándar: GB/T3190-1996

●1060 chemical composition:

Silicio nu'bu̲: 0.25
Nt'eme hierro: 0.35
Cobre Cu: 0.05
Manganeso Mn: 0.03
Magnesio Mg: 0.03
Zinc Zn: 0.05
Titanio nu'i: 0.03
Vanadium V: 0.05
Aluminio 'na ar: 99.6

●Mechanical properties of aluminum aleación 1060:

Resistencia a la tracción σb (Mpa) ≥75
Límite elástico condicional σ0.2 (Mpa)≥35
Tamaño ar muestra: Ga̲tho ya espesores ora Jot'i
Hñeti: The longitudinal mechanical properties of the pipe at room temperature are edited for the heat treatment process in this paragraph:

●Main features and application scope of 1060 aleación aluminio:

Industrial pure aluminum has the characteristics of high plasticity, Resistencia ar corrosión, good electrical conductivity and thermal conductivity, but low strength and impenetrable
Strengthened by heat treatment, Maquinabilidad deficiente, acceptable contact welding, soldadura gas. Make more use of its advantages to make some tools
Structural parts with specific properties, such as gaskets and capacitors made of aluminum foil, electronic tube isolation nets, wires, cables
Protective sleeves, nets, wire cores and aircraft ventilation system parts and decorations.

●Al 1060 heat treatment process:

Recocido ngutha: the heating temperature is 350-410°C; dependiendo de ar espesor efectivo ar hñei, the holding time is 30-410°C.
Between 120min; Refrigeración nge ar ndähi wa ya dehe. Recocido mextha ar mpat'i: temperatura de calentamiento: 350 ~ 500 °C; Nu'bu̲ espesor ar producto terminado ge ar ≥6 mm,
The heat preservation time is 10-30min, and when the temperature is <6milímetro, heat through; air-cool. Low temperature annealing: heating temperature 150～
250℃; holding time is 2~3h; Refrigeración nge ar ndähi wa ya dehe