Standard: GB/T3190-1996
●Chemical composition:

Silicon Si: 0.35
Iron Fe: 0.6
Copper Cu: 0.10
Manganese Mn: 0.05
Magnesium Mg: 0.05
Zinc Zn: 0.10
Vanadium V: 0.05
Aluminum Al: 99.35
Inny: 0.03

●Mechanical properties:

Tensile strength σb (MPa) )≥75
Conditional yield strength σ0.2 (MPa) )≥35
Notatka: Longitudinal mechanical properties of pipe at room temperature

●Main features and scope of application:

Industrial pure aluminum has the characteristics of high plasticity, odporność na korozję, good electrical conductivity and thermal conductivity, but low strength and impenetrable
Strengthened by heat treatment, poor machinability, acceptable contact welding, spawanie gazowe. Make more use of its advantages to make some tools
Structural parts with specific properties, such as gaskets and capacitors made of aluminum foil, electronic tube isolation nets, wires, kable
Protective cover, net, wire core and aircraft ventilation system parts and decorations; 1035 aluminum alloy is industrial pure aluminum,
Has high plasticity, odporność na korozję, przewodność elektryczna i przewodność cieplna, but low strength, heat treatment can not strengthen the cut
Poor machinability; spawanie gazowe, hydrogen atom welding and contact welding, nie jest łatwo lutować; łatwe do wytrzymania różnych obróbek ciśnieniowych i rozciągania,
pochylenie się.

●Heat treatment process:

1) Szybkie wyżarzanie: heating temperature is 350-410°C; depending on the effective thickness of the material, the holding time is between 30-120min; air or water cooling.
2) High-temperature annealing: heating temperature 350-500°C; when the thickness of the finished product is ≥6mm, the holding time is 10-30min;
3) Wyżarzanie w niskiej temperaturze: heating temperature 150-250°C; holding time 2-3h; air or water cooling