What is an aluminum strip?
Aluminum strip (listwa aluminiowa) refers to a flat, prostokątny, long and thin aluminum sheet. The raw materials of aluminum strips are pure aluminum or aluminum alloy cast-rolled aluminum coils and hot-rolled aluminum coils. How are aluminum strips made? They are rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill, and then longitudinally slit into different widths by a slitting machine according to the purpose.
Made of aluminum strip, it is lightweight, has good thermal conductivity and corrosion resistance. Strips of aluminum are typically produced in various widths and thicknesses to suit specific applications.
strips of aluminum
Aluminum strips alloy
Commonly used alloy grades for Aluminum strips include 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, itp.
What size are aluminum strips?
| Rozmiar | Parametr | Common Specification |
| Szerokość | Aluminum strip widths can range from a fraction of an inch to several inches. Widths typically range from 0.5 cale (12.7 mm) Do 12 cale (304.8 mm) albo więcej. | 100mm、200mm、300mm |
| Grubość | The thickness of aluminum strips can vary greatly depending on the intended use. Thickness range 0.1-5mm | 0.2mm、0.3mm、0.4mm、0.5mm、0.6mm、0.8mm、1.0mm、1.2mm、1.5mm、2.0mm、2.5mm |
| Długość | The length of aluminum strips usually varies based on the manufacturing process and customer requirements. Can be cut to specific lengths as needed. | Customized production according to needs |
Aluminum strips temper
Commonly used states of strips of aluminum include O state and H temper.
Aluminum strips O means soft state, aluminum strips H means hard temper.
Aluminum strip common thickness specifications
1/2 inch wide aluminum strips
1 inch wide aluminum strips
1/16 listwy aluminiowe
4 inch wide aluminum strips
3 inch wide aluminum strips
aluminum strips with holes
1/4 inch wide aluminum strips
Aluminum strip element content
| Chemical element composition of aluminum strip (%) | |||||||||
| 1050 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.05 | 99.5 |
| 1060 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | 99.6 |
| 1070 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | 0.04 | 0.03 | 0.05 | 99.7 |
| 3003 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.6 | 0.7 | 0.04-0.20 | 1.0-1.5 | / | 0.1 | / | 0.20 | Remaining |
| 3004 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.3 | 0.7 | 0.25 | 1.0-1.5 | / | 0.1 | / | 0.20 | Remaining |
| 3103 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.5 | 0.7 | 0.1 | 0.9-1.5 | 0.3 | 0.1 | / | 0.20 | Remaining |
| 5005 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.3 | 0.7 | 0.2 | 0.5-1.1 | 0.3 | 0.25 | / | 0.20 | Remaining |
| 5052 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.1 | / | 0.20 | Remaining |
| 8011 listwa aluminiowa | |||||||||
| Element | I | Fe | Cu | Mn | Mg | Zn | Z | Inni | Glin |
| Treść | 0.5-0.9 | 0.6-1.16 | 0.1 | 0.2 | 0.05 | 0.1 | 0.08 | 0.20 | Remaining |
What is the impact of aluminum strip thickness on use?
The thickness of the aluminum strip directly affects its use effect and life cycle. Too large or too small thickness will affect the performance and reliability of the product. If the thickness of the strips of aluminum is less than the nominal value, its strength and rigidity will be reduced, and it will be more likely to deform or break. On the contrary, if the thickness of the aluminum strip exceeds the nominal value, it will not only waste material resources, but also increase manufacturing difficulty and cost. Dlatego, the nominal thickness of aluminum strip is usually between 0.15mm and 5.0mm.
strips of aluminum
Common uses of aluminum strips
Listwa aluminiowa transformatora
Aluminum tape for cables
Stamped aluminum strip
Alloy aluminum strip
Semi-hard aluminum strips
Taśma aluminiowa powlekana kolorowo
What are aluminum strips used for?
Due to the various properties of aluminum, including its lightweight, corrosion resistance and electrical conductivity, listwy aluminiowe, a further processed product, are widely used in various industries.
Strips of aluminum are used in the electronic field:
Aluminum strips are used as manufacturing materials for electronic components, such as radiators, battery cells, printed circuit boards, itp.
Strips of aluminum are used in the construction field:
Aluminum strips are often used in the manufacture of building exterior wall panels, interior wall decorative panels, door and window frames and other materials. They are beautiful, lightweight, and corrosion-resistant.
Strips of aluminum are used in the packaging field:
Aluminum strips are widely used in the packaging of food, beverages, pharmaceuticals and other products. They have the characteristics of good sealing, strong barrier properties, and recyclability.
Strips of aluminum are used in cars:
Decorative and decorative features
Weather stripping and seals
Structural components and body panels
Aluminum strips for heat exchangers:
Heat exchanger fins and tubes
Radiator components
Aluminum strips are used in aerospace:
aircraft structural parts
Internal components and panels
Aerospace fasteners
Aluminum channel for led strips
Odniesienie: wikipedia;
Zostaw odpowiedź