Що 1060 aluminum coil grade?
1060 aluminum coil refers to a coil made of aluminum alloy 1060. 1060 aluminum coil contains 99.6% алюміній, also known as 1060 pure aluminum coil. Алюмінієвий сплав 1060 is a popular and widely used alloy in the 1000 серії алюмінієвих сплавів.
Алюмінієва котушка 1060 has high electrical conductivity, good formability and relatively low strength, and has a wide range of applications in industry.
1060 aluminum alloy elements and content
| сплав | І | Fe | Cu | Мн | Mg | Zn | з | кр | Ал |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | / | 99.6 |
1060 aluiminum coil mechanical properties
| Загартування сплаву | Міцність на розрив | Межа текучості | Подовження |
| 1060-o aluminum coil | 55 МПа (8,000 psi) | 21 МПа (3,000 psi) | 30% |
| 1060 H12 aluminum coil | 89 МПа (12,900 psi) | 83 МПа (12,000 psi) | 5% |
| 1060 H14 aluminum coil | 89 МПа (12,900 psi) | 83 МПа (12,000 psi) | 5% |
| 1060 H16 aluminum coil | 98 МПа (14,200 psi) | 90 МПа (13,000 psi) | 4% |
| 1060 H18 aluminum coil | 105 МПа (15,200 psi) | 95 МПа (13,800 psi) | 3% |
| 1060 H22 aluminum coil | 75 МПа (10,900 psi) | 65 МПа (9,400 psi) | 9% |
| 1060 H24 aluminum coil | 85 МПа (12,300 psi) | 75 МПа (10,900 psi) | 6% |
| 1060 H26 aluminum coil | 95 МПа (13,800 psi) | 85 МПа (12,300 psi) | 5% |
| 1060 H28 aluminum coil | 100 МПа (14,500 psi) | 90 МПа (13,000 psi) | 4% |
What are the characteristics of 1060 алюмінієва котушка?
Алюмінієвий сплав 1060 is known for its special properties suitable for various applications. The following are the main properties of 1060 алюміній:
Чистий алюміній: Al1060 is considered a pure aluminum alloy with a minimum aluminum content of 99.60%. It contains only small amounts of other elements, which contribute to its high conductivity and other properties.
провідність: One of the most notable properties of 1060 aluminum coil is its high conductivity. This makes it suitable for applications where electrical conductivity is critical, наприклад дроти, transmission lines and conductive materials.
Формованість: Алюмінієва котушка 1060 has excellent formability, it can be easily bent, formed or rolled into various shapes without cracking or breaking. This characteristic makes it suitable for processes such as deep drawing, spinning and stamping.
Зварюваність: 1060 aluminum coil has good weldability and can be joined using various welding techniques, including resistance welding and fusion welding.
Стійкість до корозії: While not as corrosion resistant as some other aluminum alloys, 1060 aluminum still has some resistance to atmospheric corrosion.
Heat dissipation: Due to its high thermal conductivity, 1060 aluminum is used in applications where heat dissipation is important. This makes it suitable for radiators and heat exchangers.
Оздоблення поверхні: 1060 aluminum coil can achieve a good surface finish, which makes it suitable for applications where appearance is important, such as reflective materials, signage and decorative elements.
Anodizing: 1060 aluminum can be anodized to improve its corrosion resistance and form a protective oxide layer on the surface.
Cost-effective: Оскільки 1060 aluminum is a relatively simple alloy with a high aluminum content, it is often more cost-effective than other aluminum alloys with more complex compositions.
The properties of 1060 алюміній, including high electrical conductivity, excellent formability, weldability and heat dissipation, make it suitable for a range of applications in the electrical, electronics and general manufacturing industries.
довідка: вікіпедія;
Алюмінієва котушка 1050 проти 1060
| Пункт | Алюмінієва котушка 1050 | Алюмінієва котушка 1060 |
| Склад сплаву: | The alloy contains 99.5% чистий алюміній, one of the purest aluminum alloys commercially available. Very soft and has excellent corrosion resistance. | 1060 is similar to 1050, і 1060 aluminum alloy is also composed of 99.6-99.7% чистий алюміній. It is also part of the commercial pure aluminum group and shares many of the same properties as 1050. |
| Сила | : Обидва 1050 і 1060 aluminum alloys have relatively low strength compared to other aluminum alloys. They are often used in applications where strength is not a primary requirement. | |
| Формованість | Обидва 1050 і 1060 alloys have excellent formability and are suitable for various forming processes such as rolling, extrusion and drawing. | |
| Зварюваність | Both alloys have good weldability and can be easily joined using various welding techniques. | |
Залиште відповідь