Ho hlahloba Phatlalatso ea 3104 Aluminium Alloy: Matla, Ho tšoarella, le bofokoli bo kentsoe

Aluminium Alloys ba fetotse liindasteri tse fapaneng, ho tloha ka aerospace le lipalangoang ho ea ho tsetha le kaho. Har'a tsena, 3104 Aluminium Alloy e eme joalo ka khetho e fapa-fapaneng haholo le ea se nang boiphihlelo.

Motsoako oa eona o ikhethang oa matla, Ho Funyesa, khanyetso ea kutu, 'Me ho sebetsa ho e etsa boitsebiso bo loketseng bakeng sa lisebelisoa tse ngata tsa ho batla likopo.

Tšebeliso ena e felletseng, Re senya ka botebo ka har'a thepa, Melemo, lits'ebetso, le ho nahana ka nako e telele ea 3104 motsoako oa aluminium, Ho bontša hore na ho feto-fetoha ha bona ho sebetsana joang le litharo tsa boenjiniere le tsa tlhahiso.

Kutloisiso 3104 Aluminium Alloy: Kakaretso

Pele o hlahloba tšebeliso e matla le melemo ea 3104 motsoako oa aluminium, Ho bohlokoa ho utloisisa litšobotsi tsa eona tsa mantlha, motsoako oa motsoako, le likheo.

Ke eng 3104 Aluminium Alloy?

3104 Aluminium Alloy ke allomonium-manganese alloy e khethiloeng tlasa 3000 letoto.

E tsebahala ka lebaka la ho se sebetse hantle le matla a matle, 3104 hangata e khethoa likopo tse batlang ho kopanya ho nolofatsa ka mokhoa o nepahetseng ka thepa e tšepahalang.

Lello lena le entsoe haholo ka aluminium ka hoo e ka bang 0.6 ho 1.0% manganese, e ntlafatsang matla a eona le ho hanyetsa.

E boetse e na le likarolo tse ling tse ngata tse kang magnesium le tse ngata tsa silicon, Ho ntlafatsa ts'ebetso ea eona e felletseng.

Aloy histiation le letoto la alloy

The 3000 li-aluminiums tsa Aluminiums, ho kenyeletsa 3104, ha se li-alloys tse ka thata.

Li tsebahala ka ho itšireletsa ha bona, Matla a itekanetseng, 'me ea hlokang tlhaho e ikhethang.

Mekhoa ea Mechine ea 'Mele

• Matla a tšepe: 18,000 - 23,000 psi (124 - 160 MPa)
• Kotulo Matla: Hoo e ka bang 17,000 - 21,000 psi (117 - 145 MPa)
• Ho Funyesa: Phahameng, E loketse ts'ebetso ea ho theha
• Khanyetso ea Corrosion: E kgabane, Haholo-holo ka kakaretso ea tikoloho
• Botenya: Ho potoloha 2.7 g/cm³
• Melting Point: Hoo e ka bang 660 ° C (1220°F)

Ho utloisisa litšobotsi tsena tsa motheo ho re lumella ho utloisisa hore na joang 3104 Aluminium Alloy e hokahana ka mokhoa o seng mats'oahla ho etsa lintho tse fapaneng le boenjiniere.

Thepa ea mantlha ea 3104 Aluminium Alloy

Ts'ebeliso e Ntle ea 3104 Aluminium Alloy e kholo haholo ka lebaka la motsoako oa eona o ikhethang oa thepa, e fanang ka mahlaseli a mabeli a bonolo le ho nolofatsa.

Matlafatso le ho feto-fetoha le maemo

3104 Aluminium e na le matla a phahameng ha a bapisoa le tloaelehileng 3003 metsoako, ke leboha haholo le litaba tse eketsehileng tsa manganesese.

Matla ana a etsa hantle ka likopo tse hlokang hore motho a tšoarelle.

• Matla a tšepe: Rangesical e tloaelehileng ho tloha 18,000 ho 23,000 psi, ho latela bohale
• Kotulo Matla: Ho potoloha 17,000 PSI kapa ho feta
• Elongation: E phahameng haholo, ho supa khatello e ntle haholo

Tekanyetso ena ea ho etsa lintho ka matla e etsa hore e etse mekhoa e meng e kang ho taka e tebileng, kobeha, le ho theha ntle le ho hlapela kapa ho beha mabaka.

Khanyetso ea Corrosion

E 'ngoe ea likarolo tse ntle tsa alloy ke ho hanyetsa e ntle haholo ho siraro, Haholo-holo maemong a kantle kapa ha a pepesetsoa ho mongobo kapa mabenyane a leholimo.

• E loketse tšebeliso ho tikoloho ea metsing
• Ha e hanyetsa oxidation Nakong ea ts'ebetso
• E boloka ponahalo e ratehang ha nako e ntse e tsamaea

Ts'ebetso le masela

3104 Ts'ebetso ea Aluminium ke khahleho e kholo bakeng sa baqapi le baetsi ba lihlahisoa.

Ho senyeha ha eona haholo, sebopehong, le mechine e thusa ho etsa tlhahiso e thata le e lekaneng.

• Setšoantšo se tebileng: E loketseng haholo, ho e etsa khetho e ratoang bakeng sa li-cans tse ntle le ho paka
• Ho khumama le ho kuta: E ka rekisoa habonolo ka mefuta e rarahaneng
• Welding: E lumellana le mekhoa e sa tloaelehang ea ho hlakola, netefatsa manonyeletso a matla

Phekolo ea mocheso le ho qeta

Joalo ka alloy e sa lefelloeng ka thata, 3104 e fumana matla a eona haholo ka ho sebetsa. Leha ho le joalo, mocheso o itseng o lumella ts'ebetso e hlophisitsoeng:

Ho etsa lihlahisoa le ts'ebetso ea 3104 Aluminium Alloy

Phapano e phahameng ea 3104 Aluminium Alloy o metse ka mekhoa ea eona ea ho feto-fetoha ha eona e kenyelletsang ho roka, extrusion, ho hatakela, le ho feta.

Ho Roya le Tlhahiso ea She shepe

• Ho pitikoloha ho batang ho ntlafatsa ho fihlela qetellong, Mefuta e metamo, le thepa ea mochini
• Maqephe a teteaneng kapa a manyane li hlahisoa bakeng sa lits'ebetso tse fapaneng
• Phekolo ea Bongata joalo ka anodizing kapa pente e ntlafatsa ho hanyetsa le ho hapa li-aesthetics

Ho fetoha le ho iphelisa le ho theha

• E loketse melemo e boletsoeng e sebelisitsoeng ho meralo, Liforame tsa Windows, le terene
• Holwano ya eona e Khabane e Hlophisa libopeho tse rarahaneng ntle le ho akheha
• E thusa ho beha likarolo tse nang le boholo ba tsona tse hlakileng

Ho itšeha, Ho khumama, le mechine

• Khaola habonolo ho sebelisa lisebelisoa tse tloaelehileng joalo ka limela, Li-Saws, kapa li-custter tsa laser
• Ts'ebetso ea ho ba le eona e otlolohile, Ke leboha haholo ka motho ea phahameng
• Ho latela metjeko e boreleli ebile e boleloa esale pele, Ho boloka nako le ho fokotsa lisebelisoa

Welding le ho Qolla Mekhoa

Ho fihlela matla, Manonyeletso a tšepahalang a bohlokoa bakeng sa lits'ebetso tse ngata. 3104 Aluminium welds a sebelisa hantle:

• Tig (Tungasten Inert khase) welding
• Nna (Metal Itert Gase) welding
• Pherekano

Ho hloekisa pele ho wel-weald le ho sebetsa ho lokisa maemo a kopaneng a kopaneng.

Likopo tse sebetsang tsa 3104 Aluminium Alloy

Motsoako oa eona o leka-lekaneng oa thepa le boiketlo ba ho sebetsa ho bula lemati la libaka tse fapaneng ho ea indastering e mengata.

Ka tlase, Re hlahloba tse ling tsa masimo a hlahelletseng ka ho fetisisa tse sebelisang 3104 motsoako oa aluminium.

Ho jara lijo le ho se be le tsona

Hobaneng e sebetsa: E bobebe, e thibelang ho bola, E ntle haholo bakeng sa ho theha, 'me ha ea phethola haholo.

• Li-cans tse ntle le lids
• Liphoofolo le lits'oants'o
• Ho na le libaka tse feto-fetohang

Melemo: E sebetsa hantle, Eco-Metsoalle, hape e boloka bocha ba sehlahisoa.

Metsoako ea meralo le ea sebopeho

Hobaneng e sebetsa: Ho tšoarella, Boipiletso bo botle, le bokhoni bo lokelang ho etsoa ka libopeho tse thata.

• Liforame tsa Windows
• Mabota a curtain
• Manolo a Matsoho
• Lipolelo le terata

Mehopolo: Mekhoa ea kalafo ea mantlha e ntlafatsa boipiletso ba pono le ho sireletsa khahlanong le boemo ba leholimo.

Indasteri ea likoloi le lipalangoang

Hobaneng e sebetsa: Phokotso ea boima ba boima, khanyetso ea kutu, le thepa e matla ea sebopeho.

• Likarolo tsa 'mele
• Trim ea Trim
• Litanka tsa mafura
• Metsoako e bobebe ea sebopeho

Melemo: E kenya letsoho ts'ebetsong ea mafura le sepheo sa ho tsitsa.

Lisebelisoa tsa Liindasteri le Mechine

Hobaneng e sebetsa: Roala khanyetso e kopaneng le mechini le matla.

• Litanka tsa polokelo
• Lisebelisoa tsa ts'ebetso
• Liforeimi le tšehetso

Hlokomela: Ho hanyetsa ha eona ho fokotsa litšenyehelo tsa ho lokisa.

Litšireletso tsa Solar le tse nchafatseng

Hobaneng e sebetsa: Ho tšoarella ha maemo a ka ntle ho tikoloho le tlhaho e bobebe.

• Li-Racks tse ntseng li eketseha
• Ts'ehetso ea Meetso
• Lingoloa tsa Cable

Ho bapisa 3104 Aluminium Alloy le Alloys tse ling

Ho utloisisa semelo sa 3104, Ha re e bapisoang le eona e nang le lits'oants'o tse tšoanang ho 3000 letoto.

Ka papiso e joalo, motho a ka bona seo 3104 e fana ka motsoako o leka-lekaneng oa matla le boqapi, ho etsa hore e tšoanele likopo tse hlokang ho se sireletsehe le mekhoa e meholo ea masela.

Moralo le Mehopolo ea Boenjiniere

Ha o kopana 3104 Aluminium alloy ho merero, Baenjiniere ba tlameha ho nahana ka lintlha tse 'maloa tsa bohlokoa:

Ho khetha bohale bo loketseng

• H18: E nepahetse bakeng sa setšoantšo se tebileng le ho theha moo matla a hohelang.
• H34: E loketse lits'ebetso tsa sebopeho moo matla a itekanetseng le ho ba le tsebo e ntle lia hlokahala.
• H36: E loketseng mekhoa e meng ea ho theha, Ho fana ka ho eketseha hoa ho fokotsoa ha moea o bobebe oa matla a matla a matla.

Bophahamo le likhetho tsa litebele

• Mokhabiso oa thipa o fana ka botsitso bo phahameng empa eketsa boima ba 'mele.
• Maqephe a marang-rang a ipatileng ka lits'ebetso tse boima litloang Bokhabane.

Ho qeta mekhoa ea hoqetela

• Anodizing: E ntlafatsa ho hanyetsa li-corrosion le aesthetics.
• Pente kapa phofo ea phofo: Eketsa ts'ireletso e eketsehileng le boipiletso ba pono.
• Polish: E ntlafatsa litšobotsi tse bonoang, E loketse lisebelisoa tsa meralo ea boqapi.

Lintlha tsa tikoloho le tsa polokeho

• Ho pheta-pheta ha Aluminium ho fokotsa tshusumetso ea tikoloho.
• Ho sebetsana ka nepo nakong ea masela ho fokotsa litšila 'me u tšoanele polokeho.

Mekhoa ea nakong e tlang le ntlafatso ho 3104 Aluminium Alloy

Phetoho e tsoelang pele ea mahlale a lintho tsa thepa e ntse e tsoela pele ho bula bokhoni bo bocha bakeng sa 3104 motsoako oa aluminium.

Ho qabana le ho ikatisa le kalafo

• Nts'etsopele ea mekhoa e tsoetseng pele ea ho qala ho ea libakeng tse tšoarellang tse telele.
• Eco-Pristors le Lipapatso tsa Paint li lumellana le Aluminium.

K'hakena ea ho etsa lintho tse bohlale

• Ho kenyelletsa ho kenella le liroboto bakeng sa ho seha le ho theha.
• Sebelisa moralo oa Ai-khanna ho eketsa katleho ea lintho tse bonahalang.

Ho Tšehetsoa le ho Ngola

• Barekisi ba phahameng ba amohang hape ka boitlamo ba indasteri '.
• Nts'etsopele ea litsamaiso tse koetsoeng tse khutsitseng bakeng sa lihlahisoa tsa aluminium.

Likopo tse hlaha

• Sebelisa Lightweight, likarolo tse matla tse matla bakeng sa likoloi tsa motlakase.
• Khokahano ea li-module tsa moaho o hahiloeng ka lebaka la kaho e potlakileng.

Malebela a sebetsang a ho sebetsa le 3104 Aluminium Alloy

Ho eketsa thepa le li-lefu la 3104 Aluminium ka mererong ea hau, Latela litataiso tsena tse sebetsang:

• Libaka tsa pele ho tse hloekileng Pele u qala kapa ho qeta ho netefatsa manonyeletso a matla.
• Khetha bohale bo nepahetseng Ho ipapisitsoe le matla a hlokahalang le ho balla.
• Sebelisa lisebelisoa le mahlakore a lumellanang Ho thibela tšenyo ea metsi nakong ea masela.
• Etsa kopo ea likolo tse sirelletsang kapa onodize ho holisa ho hanyetsa.
• Ho akaretsa mekhoa e tsitsitseng ka ho hlakola aluminium scrap le lisebelisoa tsa litšila.

Sephetho

Sebakeng se matla sa boenjiniere le ho etsa lihlahisoa, 3104 Aluminium Alloy e hlaha e le thepa e kopanyang matla, tenyetseha, le ho tsitsa.

Bokhoni ba eona ba ho thehoa ka libopeho tse rarahaneng, Hanela lintlha tsa tikoloho, le ho boloka ts'ebetso e phahameng e le khetho e tšepahalang Indasteri.

Ho tloha ho li-arpholocture, Likoloi tsa ho tsamaisa thepa e ncha, Setsi sa eona sa boipiletso se ntse se hola.

Bokamoso ba 3104 Aluminium Alloy e tla etsahala ka mokhoa o hlakileng o kenyelletsa mekhoa e bohlale ea ho fana ka matla, Phekolo ea Bontle ho Thepa, le ho kopanya ho tsitsinyetsana, Litharollo tse bobebe tse khotsofatsang le mathata a boqapi le boenjiniere.

Ka ho utloisisa thepa le bokhoni ba eona, Baenjiniere, Baetsi ba Baetsi, le baqapi ba ka lokolla liphaephe tsa 'nete tsa Alloy, Ho theola bofokoli le ho fihlela bothateng ba bona mererong ea bona.

Abelana le PDF: Khoasolla