Qu'est-ce que 1060 alliage d'aluminium

1060 aluminum alloy contains 99.6% aluminium, which belongs to industrial pure aluminum and is a representative product of 1000 série en alliage d'aluminium.

1060 alliage d'aluminium

1060 aluminum material is formed by pure aluminum plus a small amount of copper elements. It has high plasticity, résistance à la corrosion, conductivité électrique et conductivité thermique, but its strength is low, heat treatment cannot be strengthened, and its machinability is not good; it can be welded by gas welding, hydrogen atom welding and Contact welding, pas facile à braser; facile à résister à divers traitements et extensions de pression, pliant.

The production process of 1060 aluminum sheet/coil is relatively simple, la technologie est relativement mature, and the price has a huge advantage over other high-grade alloy aluminum sheets. With good elongation and tensile strength, it can fully meet the conventional processing requirements (stamping, élongation) and high formability.

Common product types of 1060 alliage d'aluminium

1060 feuille d'aluminium	1060 bobine d'aluminium	1060 bande d'aluminium	1060 cercle en aluminium	1060 feuille d'aluminium

1060 aluminum alloy is widely used in products that do not require high strength, such as billboards, building exterior decoration, bus body, chemical instruments, pièces de traitement de tôle, deep-drawing or rotating concave containers, pièces à souder, échangeurs de chaleur, watch surfaces And disk surfaces, plaques signalétiques, ustensiles de cuisine, décorations, appareils réfléchissants, etc..

What is the meaning of 1060 H14

1060 represents the alloy composition, which can be considered as the grade of aluminum;

H14 is the heat treatment state of the aluminum alloy. The same alloy composition has different heat treatment states, and its mechanical properties are different;

1060 h14 aluminium alloy coil

Aluminium 1060 composition chimique

1060 aluminium alloy chemical composition

Alliage	Al(%)	Et (%)	Cu (%)	Mg(%)	Zn (%)	Mn(%)	De(%)	V (%)	Fe(%)
1060	99.60	0.25	0.05	0.03	0.05	0.03	0.03	0.05	0.350

1060 aluminium alloy properties

1060 aluminium alloy properties

Propriété	Value in metric unit		Value in NOUS unit
1060 Aluminium alloy density	2.705 *10³	kg/m³	169	lb/pi³
Modulus of elasticity	69	GPa	10000	ksi
Thermal expansion (20 ºC)	23.6*10-6	ºCˉ¹	13.1*10-6	in/(in* ºF)
La capacité thermique spécifique	900	J/(kg*K)	0.215	BTU/(lb*ºF)
Conductivité thermique	231	Avec(m*K)	1600	BTU*in/(hr*ft²*ºF)
Electric resistivity	2.81*10-8	Ohm*m	2.81*10-6	Ohm*cm
Résistance à la traction (recuit)	69	MPa	10000	psi
Limite d'élasticité (recuit)	28	MPa	4000	psi
Élongation (recuit)	43	%	43	%
Shear strength (recuit)	48	MPa	7000	psi
Résistance à la fatigue (recuit)	21	MPa	3000	psi
Dureté (recuit)	19	HB	19	HB
Résistance à la traction (H16)	110	MPa	16000	psi
Limite d'élasticité (H16)	103	MPa	15000	psi
Élongation (H16)	8	%	8	%
Shear strength (H16)	69	MPa	10000	psi
Résistance à la fatigue (H16)	45	MPa	6500	psi
Dureté (H16)	30	HB	30	HB
Annealing temperature	343	ºC	650	ºF

Les sources de données:1060 aluminum alloy wiki

Aluminium 1060 équivalent

It is fundamentally very similar to 1050 alliage d'aluminium, with the difference coming down to 0.1% aluminium by weight. Cependant, while both 1050 et 1060 are covered by the same ISO standard, they are covered by different ASTM standards.

ASTMB209	ASTMB210	ASTM B211	ASTMB221
ASTM B234	ASTM B241	ASTM B345	ASTM B361
ASTM B404	ASTMB483	ASTM B548	SAEJ454
UNS A91060

Alternative names include Al99.6 and A91060. It is described in the following standards:

ASTMB 209: Standard Specification for Aluminum and Aluminum Alloy Sheet and Plate

ASTMB 210: Standard Specification for Drawn Seamless Tubing of Aluminum and Aluminum Alloys

ASTMB 211: Standard Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire

ASTMB 221: Standard Specification for Aluminum and Aluminum Alloy Extruded Rods, Rods, Wire, Shapes, and Tubes

ASTMB 483: Standard Specification for Aluminum and Aluminum Alloy Drawn Tubing for General Applications

OIN 6361: Wrought aluminum and aluminum alloy sheet, strip and plate

Packaged 1060 feuille d'aluminium

Heat treatment process of aluminum 1060

Recuit rapide: heating temperature 350～410℃;

According to the effective thickness of the material, the holding time is between 30 et 120 minutes; air-cooled or water-cooled.

Recuit à haute température: température de chauffage 350 ～ 500 ℃;

When the thickness of the finished product is ≥ 6mm, the holding time is 10-30 minutes, and when it is less than 6mm, heat it to pass; refroidissement par air.

Recuit à basse température: heating temperature 150~250℃; holding time 2~3h; air cooling or water cooling.

1060 aluminum alloy suppliers

Henan Huawei Aluminium Co., Ltée. focuses on the R&D and production of hot-rolled 1060 feuilles d'aluminium. 1060 aluminum sheets have high elongation, tensile strength, excellent electrical conductivity, and high formability, which can fully meet conventional processing requirements (stamping, élongation).

Huawei Aluminum’s ultra-wide and ultra-thick 1060 plaque d'aluminium, the internal stress is eliminated, the cutting does not deform, the maximum width is 2650mm, and the maximum thickness is 500mm. It is a rare manufacturer in China that can produce ultra-wide and ultra-thick aluminum plates.

What 1060 aluminum can we provide

• 1060 feuille d'aluminium: Largeur(),Longueur(),thickness（）；
• 1060 bobine d'aluminium：
• 1060 bande d'aluminium：
• 1060 feuille d'aluminium：
• 1060 cercle en aluminium：

1060 cercle en aluminium

Characteristics of 1060 plaque d'aluminium

• 1. The material density of 1060 aluminum plate is low, conductivité électrique, conductivité thermique, résistance à la corrosion, good plasticity, peut être transformé en assiettes, bandes, foils and extruded products, etc., and can be welded, welded and spot welded. Standard 1060 pure aluminum sheet contains more than 99.60% aluminium. It belongs to the 1000 series aluminum alloy and is a commonly used flat aluminum.
• 2. The material of 1060 aluminum sheet has some good physical properties and high plasticity, which means that 1060 aluminum sheet can withstand strict mechanical processing and can be shaped according to different needs. Excellente résistance à la corrosion.
• 3. En outre, the advantage of 1060 aluminum plate material is also used to accommodate corrosive or chemical liquids. Donc, combined with its lightweight metal properties, 1060 aluminum plate is an ideal chemical container.
• 4. Good thermal conductivity and electrical conductivity. Le 1060 aluminum plate is high enough to be used in power equipment such as aluminum busbars. The conductivity of aluminum is second only to copper, and its weight is only 1/3 of that of copper.

1060 aluminum alloy applications and usage

1060 aluminum is often used in lithium battery flexible connections, busbars, road signs, charging piles, aluminum gaskets, billboard building exterior decoration, high-rise and factory exterior decoration, office lattice decoration, lamp holders, fan blades, electronic parts, ustensiles de cuisine , Reflective appliances and other fields.

• Power battery soft connection
• Aluminum for busbar
• Indoor decorations
• Curtain wall panel

1060 feuille d'aluminium / plaque / coil / foil applications

Application of 1060 feuille d'aluminium: battery flexible connection, bus interior decoration, pièces automobiles, panneaux en aluminium-plastique, signs, lamps, wide curtain walls, bus luggage racks/floors/pattern plates (used by Yutong), etc.;

Application of 1060 medium-thick aluminum plate: aluminum busbar, automobile radiator, new energy vehicle charging pile, mold, etc.;

Application of 1060 aluminum foil coil: aluminum foil gasket, emballages alimentaires, electronic label, aluminum foil for automobile heat shield, feuille de batterie, battery soft connection, battery ear material, battery explosion-proof valve, etc.;

1060-O state aluminum application: automotive heat shield, electronic label, battery soft connection, battery tab material, aluminum foil for battery explosion-proof valve, etc.;