1100 aluminum alloy introduction
Ál 1100 is one of the most widely used alloys,notað á sviðum sem krefjast ekki mikils styrks, svo sem búnað til meðhöndlunar og geymslu matvæla og efna, plötuvörur, hollow hardware processed by drawing and spinning, welding combination keys, endurskinsmerki, nafnplötur, o.s.frv.
1100 aluminum alloy is an ordinary industrial pure aluminum with an aluminum content of 99.0%.
The strength is low, but it has good ductility, mótunarhæfni, suðuhæfni og tæringarþol.
It can be hardened by cold working, but not by heat treatment; eftir anodizing, tæringarþol þess er hægt að bæta enn frekar, and at the same time, a beautiful surface can be obtained.
The surface of Huawei 1100 aluminum is beautiful without obvious blemishes.
álblöndu 1100 datasheet
Álblöndu 1100 efnasamsetning
| Frumefni | Ál (Al) | Silcon(Og) + Járn(Fe) | Kopar (Cu) | Sink (Zn) | Mangan (Mn) | Beryllium (Be) |
| Efni(%) | 99.00 | ≤ 0.95 | ≤ 0.20% | ≤ 0.10 | ≤ 0.50 | ≤ 0.0008 |
Álblöndu 1100 Líkamlegir eiginleikar
| Eiginleikar | Mæling | ensku |
| Þéttleiki | 2.71 g/cc | 0.0979 lb/in³ |
| Bræðslumark | 643 – 657.2 °C | 1190 – 1215 °F |
Þéttleiki ál ál 1100 is 2.71g/cm3. It belongs to the standard density of pure aluminum. Þéttleikinn á 1100 aluminum is relatively low. It can be regarded as a medium-density aluminum plate.
Mechanical properties of aluminum alloy 1100
| Eiginleikar | Mæling | ensku |
| hörku, Brinell | 23 | 23 |
| Togstyrkur, Ultimate | 89.6 MPa | 13000 psi |
| Togstyrkur, Afrakstur | 34.0 MPa | 4930 psi |
| Lenging í hléi | 15 – 28% | 15 – 28% |
| Mýktarstuðull | 68.9 GPa | 103000 ksi |
| Ultimate Bearing Strength | 159 MPa | 23100 psi |
| 1100 Aluminum Yield Strength | 55.0 MPa | 7980 psi |
| Togstyrkur, Ultimate | 89.6 MPa | 13000 psi |
| Poissons Ratio | 0.33 | 0.33 |
| Þreyta Styrkur | 34.5 MPa | 5000 psi |
| Skúfstuðull | 26.0 MPa | 3770 psi |
| Skúfstyrkur | 62.1 MPa | 9000 psi |
Thermal properties of 1100 alloy aluminum
| Eiginleikar | Mæling | ensku |
| Heat of Fusion | 390 J/g | 168 BTU/lb |
| Sérstök hitageta | 0.904 J/g-°C | 0.216 BTU/lb-°F |
| Varmaleiðni | 222 W/m-K | 1540 BTU-in/hr-ft²-°F |
Gagnaheimildir：https://alloysintl.com/inventory/aluminum-alloys/aluminum-1100/
Ál 1100 jafngildi
1100 is the Aluminum Association (Aa) designation for this material. In European standards, it will be given as EN AW-1100. A91100 is the UNS number. Að auki, the EN chemical designation is Al99,0Cu.
- Al99.0Cu
- A91100
- ASTM B209
- ASTM B210
- ASTM B211
- ASTM B221
- ASTM B483
- ASTM B491
- ASTM B547
Production standards：GB/T 3190-2008
1100 Aluminum Alloy Specification
| Álblöndu | 1100 álblöndu |
| Skapgerð | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38. |
| Þykkt | 0.1-500 mm |
| Breidd | 20-2600 mm |
| Lengd | 500-16000 mm |
| Umsókn | Printed plates, varmaskiptar, eldunaráhöld, deep-drawing materials, flöskutappar, wide-width building curtain walls, bus interiors, bus doors/engine panels, skraut, ál-plastplötur, fortjald veggir, aluminum busbars, aluminum for transformers, hitakökur, o.s.frv. |
Eiginleikar af 1100 Álblendi
- A: Like all 1000 röð álblöndur, it has strong electrical conductivity and thermal conductivity.
- B: Meðalstyrkur, góð mótun, good ductility, and high corrosion resistance.
- C: Sterk tæringarþol, capable of stress corrosion cracking.
- D: Sterk suðuhæfni, gassuðu, arc welding, contact spot welding, wire welding, and brazing at the same time.
Hvað er 1100 ál notað til
1100 aluminum alloy is generally used in heat sinks, flöskutappar, printing plates, eldunaráhöld, byggingarefni, heat exchanger components, food and chemical handling and storage equipment, plötuvörur, hollow hardware processed by drawing and spinning , welding combination keys, endurskinsmerki, nafnplötur, deep-drawing products, o.s.frv.
1100 hot-rolled aluminum applications: deep-drawing materials, flöskutappar, wide-width building curtain walls, bus interiors, bus doors/engine panels, skraut, aluminum busbars, aluminum for transformers, hitakökur, o.s.frv.;
1100 aluminum foil coil applications: ál-plastplötur, electronic foil, rafhlöðupappír, o.s.frv.;
1100 vs 1060 álblöndu
| Different composition | Samsetningin á 1100 ál og 1060 aluminum is different. 1100 aluminum is composed of aluminum and other alloying elements, eins og kopar, sink, mangan, o.s.frv., and its aluminum content is more than 99.00%. 1060 áli is composed of more than 99.60% aluminum and a small amount of other alloying elements. |
| Different performance | Togstyrkur á 1100 ál er hærra en á 1060 áli, and the compressive strength is also higher. Auk þess, 1100 aluminum is also more resistant to corrosion, with a brighter surface finish and a longer service life. The tensile strength and compressive strength of 1060 aluminum are lower than that of 1100 áli, its corrosion resistance is also weaker than that of 1100 áli, its surface gloss is not as good as that of 1100 áli, and its service life is also shorter. |
| Different uses | Due to its excellent performance, 1100 aluminum can be widely used in construction, bifreið, home appliance, húsgögn, umbúðir, lamps and other industries, and can be used to make various types of aluminum products. Hins vegar, due to its low tensile strength and compressive strength, 1060 aluminum is generally used to make aluminum products that do not require high strength, such as aluminum foil, kitchen pots, o.s.frv. |
| Different prices | Verðin á 1100 ál og 1060 aluminum are also different. Vegna þess að 1100 aluminum has higher tensile strength, compressive strength, corrosion and corrosion resistance, its price is also much higher than that of 1060 áli. |
1100 aluminum plate alloy packaging and delivery
1100 aluminum alloy sheet packaged
- 1. Carry out paper clipping or film coating on the aluminum plate to ensure that the surface of the aluminum plate is intact without scratches;
- 2. Plastic or kraft paper packages are used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during transportation (each package has a moisture-proof desiccant to ensure the quality of our products in the rainy East and South China regions);
- 3. Settu upp trébretti og styrktu þau með stálræmum til að forðast árekstra við flutning og tryggja að rúmfræðileg lögun álplötunnar haldist óbreytt;
- 4. Export products are packed in wooden boxes and brackets with fumigation marks;
- 5. Pack according to other packaging requirements of customers;
Skildu eftir svar