무엇인가요 1060 알루미늄 합금

1060 aluminum alloy contains 99.6% 알류미늄, which belongs to industrial pure aluminum and is a representative product of 1000 시리즈 알루미늄 합금.

1060 알루미늄 합금

1060 aluminum material is formed by pure aluminum plus a small amount of copper elements. It has high plasticity, 내식성, 전기전도도 및 열전도도, but its strength is low, heat treatment cannot be strengthened, and its machinability is not good; it can be welded by gas welding, hydrogen atom welding and Contact welding, 브레이킹이 쉽지 않다; 다양한 압력 가공 및 확장에 쉽게 견딜 수 있습니다., 벤딩.

의 생산 과정 1060 aluminum sheet/coil is relatively simple, 기술이 비교적 성숙하다, and the price has a huge advantage over other high-grade alloy aluminum sheets. With good elongation and tensile strength, it can fully meet the conventional processing requirements (stamping, 스트레칭) and high formability.

Common product types of 1060 알루미늄 합금

1060 알루미늄 시트	1060 알루미늄 코일	1060 알루미늄 스트립	1060 알루미늄 원	1060 알루미늄 호일

1060 aluminum alloy is widely used in products that do not require high strength, such as billboards, building exterior decoration, bus body, chemical instruments, 판금 가공 부품, deep-drawing or rotating concave containers, 용접 부품, 열교환기, watch surfaces And disk surfaces, 명판, 주방 용품, 장식물, 반사 기구, 등.

What is the meaning of 1060 H14

1060 represents the alloy composition, which can be considered as the grade of aluminum;

H14 is the heat treatment state of the aluminum alloy. The same alloy composition has different heat treatment states, and its mechanical properties are different;

1060 h14 aluminium alloy coil

알류미늄 1060 화학적 구성 요소

1060 aluminium alloy chemical composition

합금	알(%)	그리고 (%)	Cu (%)	마그네슘(%)	아연 (%)	망간(%)	의(%)	V (%)	철(%)
1060	99.60	0.25	0.05	0.03	0.05	0.03	0.03	0.05	0.350

1060 알루미늄 합금 특성

1060 알루미늄 합금 특성

재산	Value in metric unit		Value in US unit
1060 Aluminium alloy density	2.705 *10³	kg/m³	169	lb/ft³
Modulus of elasticity	69	GPa	10000	ksi
Thermal expansion (20 ºC)	23.6*10-6	ºCˉ¹	13.1*10-6	in/(in* ºF)
Specific heat capacity	900	J/(kg*K)	0.215	BTU/(lb*ºF)
열 전도성	231	W/(m*K)	1600	BTU*in/(hr*ft²*ºF)
Electric resistivity	2.81*10-8	Ohm*m	2.81*10-6	Ohm*cm
인장강도 (annealed)	69	MPa	10000	psi
항복 강도 (annealed)	28	MPa	4000	psi
연장 (annealed)	43	%	43	%
Shear strength (annealed)	48	MPa	7000	psi
Fatigue strength (annealed)	21	MPa	3000	psi
경도 (annealed)	19	HB	19	HB
인장강도 (H16)	110	MPa	16000	psi
항복 강도 (H16)	103	MPa	15000	psi
연장 (H16)	8	%	8	%
Shear strength (H16)	69	MPa	10000	psi
Fatigue strength (H16)	45	MPa	6500	psi
경도 (H16)	30	HB	30	HB
Annealing temperature	343	ºC	650	ºF

데이터 소스:1060 aluminum alloy wiki

알류미늄 1060 동등한

It is fundamentally very similar to 1050 알루미늄 합금, with the difference coming down to 0.1% aluminium by weight. 하지만, while both 1050 그리고 1060 are covered by the same ISO standard, they are covered by different ASTM standards.

ASTM B209	ASTM B210	ASTM B211	ASTM B221
ASTM B234	ASTM B241	ASTM B345	ASTM B361
ASTM B404	ASTM B483	ASTM B548	SAE J454
UNS A91060

Alternative names include Al99.6 and A91060. It is described in the following standards:

ASTM B 209: Standard Specification for Aluminum and Aluminum Alloy Sheet and Plate

ASTM B 210: Standard Specification for Drawn Seamless Tubing of Aluminum and Aluminum Alloys

ASTM B 211: Standard Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire

ASTM B 221: Standard Specification for Aluminum and Aluminum Alloy Extruded Rods, Rods, Wire, Shapes, and Tubes

ASTM B 483: Standard Specification for Aluminum and Aluminum Alloy Drawn Tubing for General Applications

ISO 6361: Wrought aluminum and aluminum alloy sheet, strip and plate

Packaged 1060 알루미늄 시트

Heat treatment process of aluminum 1060

급속 어닐링: heating temperature 350～410℃;

According to the effective thickness of the material, the holding time is between 30 그리고 120 분; air-cooled or water-cooled.

고온 어닐링: 가열 온도 350~500℃;

When the thickness of the finished product is ≥ 6mm, 보유시간은 10-30 분, and when it is less than 6mm, heat it to pass; 공기 냉각.

저온 어닐링: heating temperature 150~250℃; holding time 2~3h; air cooling or water cooling.

1060 aluminum alloy suppliers

허난화웨이알루미늄, (주). focuses on the R&D and production of hot-rolled 1060 알루미늄 시트. 1060 aluminum sheets have high elongation, tensile strength, excellent electrical conductivity, and high formability, which can fully meet conventional processing requirements (stamping, 스트레칭).

Huawei Aluminum’s ultra-wide and ultra-thick 1060 알루미늄 판, the internal stress is eliminated, the cutting does not deform, the maximum width is 2650mm, and the maximum thickness is 500mm. It is a rare manufacturer in China that can produce ultra-wide and ultra-thick aluminum plates.

무엇 1060 aluminum can we provide

• 1060 알루미늄 시트: 너비(),길이(),thickness（）；
• 1060 알루미늄 코일：
• 1060 알루미늄 스트립：
• 1060 알루미늄 호일：
• 1060 알루미늄 원：

1060 알루미늄 원

Characteristics of 1060 알루미늄 판

• 1. The material density of 1060 aluminum plate is low, electrical conductivity, thermal conductivity, 내식성, good plasticity, 플레이트로 가공할 수 있습니다., 스트립, foils and extruded products, 등., and can be welded, welded and spot welded. 기준 1060 pure aluminum sheet contains more than 99.60% 알류미늄. 그것은에 속한다 1000 series aluminum alloy and is a commonly used flat aluminum.
• 2. The material of 1060 aluminum sheet has some good physical properties and high plasticity, which means that 1060 aluminum sheet can withstand strict mechanical processing and can be shaped according to different needs. 우수한 내식성.
• 3. 게다가, the advantage of 1060 aluminum plate material is also used to accommodate corrosive or chemical liquids. 그러므로, combined with its lightweight metal properties, 1060 aluminum plate is an ideal chemical container.
• 4. Good thermal conductivity and electrical conductivity. 그만큼 1060 aluminum plate is high enough to be used in power equipment such as aluminum busbars. The conductivity of aluminum is second only to copper, and its weight is only 1/3 of that of copper.

1060 aluminum alloy applications and usage

1060 aluminum is often used in lithium battery flexible connections, busbars, road signs, charging piles, aluminum gaskets, billboard building exterior decoration, high-rise and factory exterior decoration, office lattice decoration, lamp holders, fan blades, electronic parts, 주방 용품 , Reflective appliances and other fields.

• Power battery soft connection
• Aluminum for busbar
• Indoor decorations
• Curtain wall panel

1060 알루미늄 시트 / 그릇 / 코일 / foil applications

Application of 1060 알루미늄 시트: battery flexible connection, bus interior decoration, 자동차 부품, 알루미늄 플라스틱 패널, signs, lamps, wide curtain walls, bus luggage racks/floors/pattern plates (used by Yutong), 등.;

Application of 1060 medium-thick aluminum plate: aluminum busbar, automobile radiator, new energy vehicle charging pile, mold, 등.;

Application of 1060 aluminum foil coil: aluminum foil gasket, 식품 포장, electronic label, aluminum foil for automobile heat shield, 배터리 호일, battery soft connection, battery ear material, battery explosion-proof valve, 등.;

1060-O state aluminum application: automotive heat shield, electronic label, battery soft connection, battery tab material, aluminum foil for battery explosion-proof valve, 등.;