Common aluminum and aluminum alloys, 1000 alumini i pastër, 3000 seri, 5000 seri, 6000 seri, 8000 seri lidhjeve të aluminit
Primary aluminum is collectively referred to as electrolytic aluminum in the market supply, and it is the raw material for the production of aluminum and aluminum alloy materials. Aluminum is a metal with low strength and good plasticity. In addition to the application of some pure aluminum, in order to improve the strength or comprehensive performance, it is made into an alloy. Adding an alloying element to aluminum can change its structure and properties, making it suitable for various processing materials or casting parts. Alloying elements that are often added are copper, magnezi, zinku, dhe silikon.
aluminum alloy with blue film
Aluminum alloys are alloys made by mixing aluminum with other metal elements and are commonly used in various industrial fields, duke përfshirë hapësirën ajrore, prodhim automobilash, ndërtimi, elektronikë, paketimin e ushqimit, dhe më shumë.
The following are some common aluminum alloy grades and their characteristics:
The above are some common aluminum alloy grades and their characteristics. The selection of suitable aluminum alloy grades can be determined according to specific application requirements and conditions of use.
aliazh | 1000 2000 3000 4000 5000 6000 8000 series etc. |
Temperatura | O,H12,H14,H16,H18,H22,H24,H26,H112,H32,T4,T6,T651,etc. |
Trashësia | 0.006-0.02mm(Foil),0.02-6mm(Sheet/Coil/Circle),6-40mm(Plate) |
Lloji i produktit | Aluminum Sheet/Plate,Spirale alumini,Shirit alumini,Letër alumini,Rrethi i aluminit |
Surface | Mill finish,Diamond plate,Color coated,Pover coated,Anodized aluminum plate,Embossed,etj. |
1050: Squeeze coils for food, industritë kimike dhe të birrës, zorra të ndryshme, pluhur fishekzjarre.
1060: It is required for occasions with high corrosion resistance and formability, por jo kërkesa të larta për forcë, and chemical equipment is its typical application.
1100: For processing parts that require good formability and high corrosion resistance but do not require high strength, siç janë produktet kimike, food industry devices and storage containers, pjesë të përpunimit të pllakës së hollë, deep drawing or spinning concave vessels , pjesët e saldimit, këmbyesit e nxehtësisë, tabela të shtypura, targat e emrave, reflektorët.
2014 : Aplikohet në raste që kërkojnë forcë dhe fortësi të lartë (duke përfshirë temperaturën e lartë). Aircraft heavy, falsifikime, thick plates and extruded materials, rrota dhe elemente strukturore, Rezervuarët e karburantit të fazës së parë të raketave me shumë faza dhe pjesë të anijes kozmike, truck frames and suspension system parts.
2024: Strukturat e avionëve, ribatina, komponentët e raketave, truck hubs, elementet e helikës, dhe pjesë të tjera të ndryshme strukturore.
2124: Pjesë strukturore të automjeteve të hapësirës ajrore.
2A60: Aircraft engine compressor wheels, deflektorët e erës, tifozët, shtytëse, etj.
2A70: Aircraft skins, pistonët e motorit të avionit, deflektorët e erës, rrota, etj.
3003: For processing parts that require good formability, rezistencë e lartë ndaj korrozionit dhe saldim i mirë, or require both these properties and higher strength than 1XXX alloys, të tilla si enët e kuzhinës, food and chemical products Processing and storage devices, tanke dhe depozita për transportin e produkteve të lëngshme, various pressure vessels and pipes processed with thin plates.
3004: All-aluminum pop-top can body, që kërkon pjesë me forcë më të madhe se 3003 aliazh, chemical product production and storage devices, pjesë të përpunimit të pllakës së hollë, pjesë të përpunimit të ndërtimit, mjetet e ndërtimit, pjesë të ndryshme të llambës.
3104: Can body, can lid, pull ring, aircraft fuel tank, oil conduit, industrial equipment, etj.
3104 alumini për kanaçe
3105: Room partitions, ngatërresat, movable room panels, ulluqet dhe derdhjet, thin plate forming parts, tapa shishe, bottle stoppers, etj.
5005: Similar to 3003 aliazh, it has medium strength and good corrosion resistance. Used as conductors, enë gatimi, instrument panels, housings and architectural trim. Anodized film ratio The oxide film on the 3003 alloy is brighter and consistent with the tone of the 6063 aliazh.
5050: The thin plate can be used as the lining plate of refrigerators and refrigerators, tubacionet e ajrit të automobilave, oil pipes and agricultural irrigation pipes; it can also process thick plates, tubacionet, bars, special-shaped materials and wires, etj.
5052: Kjo aliazh ka formueshmëri të mirë, rezistenca ndaj korrozionit, qiriri, fatigue strength and moderate static strength, and is used in the manufacture of aircraft fuel tanks, tubacionet e naftës, sheet metal parts of transportation vehicles and ships, instrument street lamp brackets and rivets , produkte harduerike, etj.
5083: In occasions that require high corrosion resistance, saldueshmëri e mirë dhe forcë mesatare, such as welded parts of ships, automobiles and aircraft plates; enët nën presion që kërkojnë mbrojtje të rreptë nga zjarri, pajisje ftohëse, Kullat televizive, pajisje shpimi, Pajisjet e transportit, komponentët e raketave, forca të blinduara, etj.
5086: For occasions that require high corrosion resistance, saldueshmëri e mirë dhe forcë mesatare, siç janë anijet, automobila, avionë, pajisje kriogjenike, Kullat televizive, pajisje shpimi, pajisje transporti, pjesët dhe kuvertat e raketave, etj.
5182: Thin plates are used for processing can lids, panelet e trupit të automobilave, panelet e kontrollit, përforcime, kllapa dhe pjesë të tjera.
5454: Strukturat e salduara, enët nën presion, pipelines for marine facilities.
5A05: welded structural parts, skelet i lëkurës së avionit.
5A06: Welded structure, pjesë të falsifikuara të ftohta, pjesë të tensionit të kontejnerit të salduar, pjesë të kockave të lëkurës së avionit.
6061: Various industrial structures requiring a certain strength, saldueshmëri e lartë dhe rezistencë ndaj korrozionit, siç janë tubacionet, shufra, shapes used in the manufacture of trucks, ndërtesat e kullave, anijet, tramvaje, mobilje, pjesë mekanike, përpunimi me precizion, etj. Timber, plank.
6063: Industrial profiles, architectural profiles, tubacionet e ujitjes dhe materialet e ekstruduara për automjetet, stola, mobilje, gardheve, etj.
7005: Materialet e ekstruduara, suitable for manufacturing welded structures that must have both high strength and high fracture toughness, të tilla si dërrasat, shufra, and containers for transportation vehicles; shkëmbyes të mëdhenj të nxehtësisë, and solid solution treatment after welding It can also be used to make sports equipment such as tennis rackets and softball bats.
7049: Forging parts that have the same static strength as 7079-T6 alloy and require high resistance to stress corrosion cracking, such as aircraft and missile parts falling together
Ju lutemi lini informacionin tuaj të blerjes, biznesi ynë do t'ju kontaktojë sa më shpejt të jetë e mundur. Orari ynë i punës është 8:30am-18:00pasdite tel:+86-371-66302886 Celular: +86 18137782032 Wechat: +8618137782032 Na kontaktoni
© Copyright © Henan Huawei Aluminum Co., Ltd
Mundësuar nga HWALU
Lini një Përgjigje