Standard: GB/T 4437.1-2000

● Alloy 1200 sebopeho sa lik'hemik'hale:

Aluminium Al: 99.00
Koporo Cu: ≤0.05
Zinc Zn: ≤0.10
Manganese Mn: ≤0.05
Titanium Ti: ≤0.05
Iron+silicon Fe+Si: 0.000～1.000
Hlokomela: single: ≤0.05; kakaretso: ≤0.15

● Thepa ea mochine:

Matla a tsitsitseng σb (MPa): 75～105
Elongation δ10 (%): ≥22
Elongation δ5 (%): ≥25
Hlokomela: Longitudinal mechine thepa ea phala mocheso oa kamore
Boholo ba Mohlala: Botenya bohle ba Lebota

● Litšobotsi le boholo ba ts'ebeliso:

Motsoako oa aluminium 1200 ke aluminium e hloekileng ea indasteri e nang le polasetiki e phahameng, khanyetso ea kutu, motlakase le conductivity ea mocheso, empa
Matla a fokolang, heat treatment can not strengthen, ho se sebetse hantle; ho cheseletsa khase, tjheseletsa ea athomo ea haedrojene le ho tjheseletsa ho kopana, not easy
Brazing; ho bonolo ho mamella ts'ebetso e fapaneng ea khatello le katoloso, kobeha.

●Heat treatment specifications:

1) Ho koenya ka potlako: mocheso oa mocheso ke 350-410°C; ho itšetlehile ka botenya bo sebetsang ba thepa, the holding time is
Between 30 le 120 metsotso; ho phodisa moya kapa metsi.
2) Mocheso o phahameng oa annealing: mocheso o futhumatsang 350 ~ 500℃; ha botenya ba sehlahisoa se felileng ke ≥6mm, the holding time is 10～
30min, <6mm, until it is heated through; phodiso ya moya.
3) Low-temperature annealing: mocheso oa mocheso oa 150-250 ° C; holding time 2-3 hours; ho phodisa moya kapa metsi.