1050 пластина з алюмінієвого листа h14

In the world of alloys, the 1xxx series—led by 1050—stands out for purity, провідність, і виняткова формувальність. When combined with the H14 temper, 1050 aluminum sheet plate delivers a balanced blend of moderate strength, outstanding ductility, and excellent corrosion resistance.

This makes 1050 H14 a go-to choice for applications where aluminum’s natural advantages matter: high reflectivity, easy fabrication, and reliable performance in demanding environments.

This comprehensive guide covers everything you need to know about 1050 h14 aluminum sheet plate—from fundamental composition and temper definitions to fabrication, finishing, and practical application guidance.

It also includes comparisons with similar products, procurement considerations, and a supplier profile for Huawei Aluminum, a reputable source for 1050-H14 sheet plate.

1050 пластина з алюмінієвого листа h14

Що 1050 aluminum sheet plate?

1050 алюмінієвий лист is part of the 1xxx family, the highest-purity aluminum alloys available commercially.

Typical 1xxx alloys contain aluminum with minimal alloying elements, offering exceptional corrosion resistance, high electrical and thermal conductivity, and excellent workability.

Позначення 1050 indicates a minimum aluminum content of 99.5%. When this alloy is processed to H14 temper, the material has undergone a specific degree of strain hardening (cold work) and partial annealing to achieve a particular strength-ductility balance.

• 1050: Very high purity aluminum with outstanding formability and corrosion resistance.
• H14 temper: A pressure of cold work followed by partial annealing to yield intermediate strength with retained ductility.
• The resulting material: A sheet or plate that can be readily formed, зварений, and fabricated, while maintaining good surface finish and reflectivity.

Чому 1050 h14 is a practical choice

• Вища формуваність: Because the baseline alloy is so pure, it can be shaped into complex forms with relative ease, making it ideal for deep-drawing, штампування, and intricate panels.
• Чудова стійкість до корозії: The low impurity content reduces galvanic activity, enabling robust performance in most environments.
• High reflectivity and cosmetic appeal: The surface can be bright-polished or finished to achieve a highly reflective appearance, which is valuable for lighting and signage.
• Good combination of strength and ductility: H14 temper adds strength beyond fully annealed states while preserving ductility needed for forming and finishing.
• Weldability and joinability: This alloy can be welded using common methods (Тиг, Я) with appropriate filler materials, making it suitable for assemblies.

Key properties at a glance

• Чистота: ≥99.5% aluminum (typical for 1050)
• Вдача: H14 (partial cold work with partial anneal)
• Форма: Sheet and plate in a range of thicknesses
• Щільність: ~2.70 g/cm3
• Електропровідність: ~60% IACS
• Теплопровідність: ~205 Вт/м·К
• Melting range: ~660–680°C
• Стійкість до корозії: Excellent in atmospheric and many environmental conditions
• Зварюваність: Very good with proper technique and filler
• Параметри обробки поверхні: Оздоблення млина, bright polish, анодування, покриття

Примітка: Specific property values vary with thickness, production lot, and exact tempering protocol. Always request supplier data sheets and minimum/maximum tolerances for your batch.

Variations in the 1xxx family: how 1050-H14 compares

To make informed decisions, it helps to compare 1050-H14 against closely related alloys and tempers. The following quick comparisons illustrate general behavior:

• 1050-H14 vs 1050-O (відпалений): H14 is stronger and less ductile than O; O is the softest temper with maximum formability but poorer strength.
• 1050-H14 vs 1100-H14: 1100 is very similar but typically has marginally lower resistance to chemical attack and slightly different work-hardening behavior; both offer high ductility, але 1050 often has slightly higher reflectivity and conductivity due to purity.
• 3003-H14 (Al-Mn): 3003 offers higher strength than 1050-H14 but at some loss of conductivity and formability; it’s less pure and often used where higher strength is needed in the 3xxx series.

2мм 1050 h14 aluminum sheet plate Measurement

The bottom line:

If you need near-pure aluminum with high formability and excellent corrosion resistance, 1050-H14 is often the best choice.

If you need more strength, look at 3003 or other 3xxx alloys; if you need enhanced conductivity and brightness with very high formability, 1050 remains a strong contender, and the H14 temper helps bridge the gap between fully annealed and fully hard states.

Quick comparison of 1050-H14 and close equivalents

Примітка: This table provides approximate guidance. For precise values, consult supplier data sheets and perform your own testing under your process conditions.

Applications and industries

1050-H14 sheet plate serves a wide range of applications thanks to its unique combination of properties:

• Електротехніка та електроніка: Conductive components, bus bars, тепловідводи, shielding surfaces where high conductivity and ductility matter.
• Architecture and signage: Reflective surfaces, декоративні панелі, architectural cladding, and signage with printed graphics or coatings.
• Chemical processing and equipment: Резервуари, liners, and components that encounter corrosive environments at ambient temperatures.
• Food and beverage equipment: Легкий, corrosion-resistant pieces that require cleanability and safe contact with foods (subject to regulatory compliance and coatings where needed).
• Reflective and lighting applications: Протоки, рефлектори, and light fixtures benefit from high reflectivity and ease of forming.

Huwei Packaged 1050 алюмінієвий лист

Design and engineering considerations

When integrating 1050-H14 into a design, Розглянемо наступне:

• Сила проти. formability balance: H14 temper provides an intermediate strength level; for maximum formability, consider O temper or H18/H19 if higher strength is needed, bearing in mind the trade-offs in ductility.
• Thermal and electrical performance: Expect high electrical and thermal conductivity, but always validate with supplier data for your thickness and alloy lot.
• Surface finish requirements: If your application demands bright finishes or consistent coatings, specify the desired surface condition early and confirm with the supplier.
• Weldability strategies: For welded joints, choose compatible filler materials (like 1xxx series fillers for welding 1xxx sheets) and consider post-weld heat treatment if needed for dimensional stability.
• Coatings and anodizing: Anodizing can improve wear and corrosion resistance and offer color options. Ensure the substrate’s surface finish and alloy composition align with the chosen coating.

Виробництво, обробки, і допуски

1050-H14 sheet plate is produced through a sequence of industrial processes designed to preserve surface quality, maintain dimensional accuracy, and ensure consistent temper:

• Melting and casting: Impurities are removed, and the metal is cast into billets or slabs suitable for rolling.
• Гаряче кочення: The material is hot-rolled to the required thickness, improving ductility and workability.
• Cold rolling and tempering: Cold working induces strain hardening; subsequent annealing and stabilization steps lead to the H14 temper. The exact process determines strength, пластичність, and surface characteristics.
• Оздоблення поверхні: Milling, grinding, полірування, or bright-dip finishing can be applied to achieve the desired surface condition. Anodizing or coatings may be added as a post-process.

Tolerance considerations:
– Thickness tolerance depends on the material grade, товщина, і постачальник; typical tolerances for sheet and plate in the 0.2–6.0 mm range are ±0.02–0.15 mm, with tighter tolerances for specified orders.
– Flatness and straightness tolerances are also specified in product data sheets and can vary with thickness and width.

Surface finishes and coatings

• Оздоблення млина: Natural surface with slight sheen, common for many structural and fabricated components.
• Bright finish: Polished surface for maximum reflectivity, often used in signage and decorative applications.
• Анодування: Anodic oxide layer increases hardness and wear resistance and allows color finishing. Алюміній 1050 accepts anodizing well, producing consistent hues and durable surfaces.
• Painting and powder coating: Exterior or interior surfaces can be coated for color, UV resistance, and environmental protection.
• Conversion coatings: Alodizing and other conversion coatings can improve corrosion resistance and prepare surfaces for painting or bonding.

Fabrication considerations

• Різання: 1050-H14 cuts easily with standard methods such as shearing, laser, waterjet, and sawing. Diamond-coated blades and sharp tooling help maintain edge quality.
• Згинання: Excellent formability supports tight radii and complex bend angles; use proper tooling and bend allowances to avoid cracking.
• Приєднання: Welding is straightforward with many filler materials; ensure proper preparation and heat control to avoid oxide formation and distortion.
• Підготовка поверхні: For coatings and adhesives, ensure blasted or cleaned surfaces to maximize adhesion.

Контроль якості та тестування

• Візуальний огляд: Оздоблення поверхні, вм'ятини, подряпини, and edge quality are checked on each batch.
• Dimensional checks: Товщина, ширина, довжина, and flatness are verified using calibrated gauges and metrology equipment.
• Material certification: Suppliers provide material test reports (МТР) that confirm purity, темперамент, і механічні властивості.
• Неруйнівне тестування: In critical components, eddy current, ultrasonic, or dye-penetrant testing may be used to detect subsurface defects.
• Compliance and standards: Materials should comply with relevant standards (напр., ASTM, IN, or ISO) and customer specifications.

Procurement and supplier considerations

• Lead times: Depending on demand, orders may be fulfilled from stock or produced to order, with typical lead times ranging from a few days to several weeks.
• Мінімальні обсяги замовлення (MOQ): Some suppliers impose MOQs based on thickness and width; longer runs often yield better pricing.
• Сертифікати: Request ISO 9001 or equivalent quality management certifications, and ensure compliance with environmental and safety standards.
• Документація: For traceability, obtain MTRs, mill certificates, and coating or finishing documentation as needed.
• Supplier coordination: Coordinate with the supplier on heat treatment, загартовування, покриття, and packaging requirements to ensure smooth delivery.

Tables and data sheets are essential for procurement teams to verify that a batch meets project requirements. Always verify the latest product data from the supplier and supplement with in-house testing when possible.

Food machinery used 1050 пластина з алюмінієвого листа h14

Алюміній Huawei: supplier introduction and profile

Huawei Aluminum is a well-regarded manufacturer and supplier of aluminum products, including 1xxx-series alloys such as 1050.

Headquartered in China, Huawei Aluminum serves global markets with a broad product catalog that includes aluminum sheet, плита, котушка, and extruded profiles.

The company emphasizes quality control, flexible manufacturing, and customer-centric service.

• Core capabilities: Production of high-purity aluminum sheet and plate with various tempers, including H14, H24, H18, and other common temper classes. The facility focuses on delivering consistent quality, customized sizes, and reliable delivery.
• Quality management: Huawei Aluminum commonly implements standard quality-management practices, often with ISO-based certifications to satisfy international buyers. Documentation such as material certificates, testing data, and process traceability are typically provided.
• Applications served: Machinery components, packaging materials, рефлектори, electrical components, архітектурні панелі, and other 1050-H14 applications.
• Customer support: The supplier path typically includes technical support, material data sheets, and on-time delivery programs, with options for custom-cut-to-size sheets or plates and logistic arrangements.

When considering Huawei Aluminum as a supplier for 1050-H14 sheet plate, buyers can expect:
– Access to standard and custom thicknesses within practical ranges for sheet and plate.
– Competitive pricing due to scale of production and integrated supply chain.
– Assurance of consistency across production lots through data sheets and traceability.
– Flexible order processing and responsive customer service to support design iterations and project timelines.

If you’re evaluating Huawei Aluminum, request a detailed product data sheet for 1050-H14, в тому числі:
– Хімічний склад (with tolerance)
– Механічні властивості (міцність на розрив, межа текучості, подовження)
– Thickness tolerance and flatness specifications
– Surface finish options and coating/Anodizing capabilities
– Упаковка, marking, and logistics options
– Certification documents and quality assurances

Поширені запитання

What is 1050-H14 aluminum?

1050 is a high-purity aluminum (≥99.5% aluminum). H14 is a temper indicating a combination of strain hardening and partial annealing, yielding moderate strength with good ductility and formability.

How is 1050-H14 different from 1050-H24 or 1050-H18?

H14, H24, H18 are different degrees and methods of cold work and partial annealing. H14 typically offers a balance of formability and strength; H24 and H18 represent higher levels of work hardening and strength.

Can I weld 1050-H14 sheet plate?

Так. Welding is feasible with appropriate filler metals and welding parameters. Pre-welding surface preparation and post-weld treatment can improve joint quality.

What thickness ranges are available?

Typical sheet thicknesses range from 0.2 mm to several millimeters, with plate options extending to thicker sections depending on supplier capabilities. Tolerances vary by supplier and thickness.

What finishing options are common?

Оздоблення млина, bright polish, анодування, покриття, живопис, and other surface treatments are common for 1050-H14 sheets.

Where is 1050-H14 commonly used?

Conductive electrical components, світловідбиваючі панелі, architectural and decorative panels, хімічне обладнання, and light-weight structural parts.

How does the price of 1050-H14 compare to 1100-H14 or 3003-H14?

Price varies with purity, товщина, ширина, і постачальник. В загальному, 1050 tends to be competitively priced among high-purity 1xxx alloys, з 1100 і 3003 offering different trade-offs in strength, стійкість до корозії, and processing characteristics.

What should I ask a supplier like Huawei Aluminum?

Request a current MTR (material test report), хімічний склад, механічні властивості, tolerances, surface finish options, можливості покриття, час виконання, minimum order quantities, and packaging details. Confirm certifications and quality-control processes.

Summary and takeaways

1050 H14 aluminum sheet plate represents a compelling option where high purity, Відмінна формуваність, and reliable corrosion resistance meet practical manufacturing considerations.

Its balance of moderate strength and superior ductility makes it suitable for both formed components and decorative or functional panels.

With appropriate surface finishes and coatings, 1050-H14 becomes a versatile substrate for a broad range of industrial and architectural applications.

Huawei Aluminum stands as a credible supplier option for 1050-H14 sheet plate. Their capabilities typically cover a wide range of 1xxx-series products with customization options, quality-control documentation, and global logistics solutions.

If you’re evaluating 1050-H14, reach out to Huawei Aluminum and other reputable suppliers to compare data sheets, час виконання, and total cost of ownership.

На завершення, 1050 h14 aluminum sheet plate is a versatile material that supports a variety of design goals—from robust physical performance to aesthetic appeal. Its high purity, strong forming characteristics, and reliable corrosion resistance make it a strong candidate for engineers and fabricators seeking reliable, high-quality aluminum sheet solutions.

When selecting suppliers, such as Huawei Aluminum, evaluate not only price but also data integrity, certification readiness, logistics flexibility, and post-sale technical support to ensure a successful project outcome.

Поділитися з PDF: Завантажувати