Nima bu 1060 alyuminiy qotishmasi
1060 aluminum alloy contains 99.6% alyuminiy, which belongs to industrial pure aluminum and is a representative product of 1000 seriyali alyuminiy qotishmasi.
1060 aluminium alloy
1060 aluminum material is formed by pure aluminum plus a small amount of copper elements. It has high plasticity, korroziyaga qarshilik, elektr o'tkazuvchanligi va issiqlik o'tkazuvchanligi, but its strength is low, heat treatment cannot be strengthened, and its machinability is not good; it can be welded by gas welding, hydrogen atom welding and Contact welding, qotish oson emas; turli bosimni qayta ishlash va kengaytirishga bardosh berish oson, egilish.
The production process of 1060 aluminum sheet/coil is relatively simple, the technology is relatively mature, and the price has a huge advantage over other high-grade alloy aluminum sheets. With good elongation and tensile strength, it can fully meet the conventional processing requirements (stamping, stretching) and high formability.
 |
 |
 |
 |
 |
| 1060 alyuminiy qatlam | 1060 alyuminiy lasan | 1060 alyuminiy tasma | 1060 alyuminiy doira | 1060 alyuminiy folga |
1060 aluminum alloy is widely used in products that do not require high strength, such as billboards, building exterior decoration, bus body, chemical instruments, lavha metallni qayta ishlash qismlari, deep-drawing or rotating concave containers, payvandlash qismlari, issiqlik almashinuvchilari, watch surfaces And disk surfaces, nom plitalari, oshxona anjomlari, bezaklar, aks ettiruvchi asboblar, va boshqalar.
What is the meaning of 1060 H14
1060 represents the alloy composition, which can be considered as the grade of aluminum;
H14 is the heat treatment state of the aluminum alloy. The same alloy composition has different heat treatment states, and its mechanical properties are different;
1060 h14 aluminium alloy coil
Aluminium 1060 chemical composition
| Qotishma | Al(%) | Va (%) | Cu (%) | Mg(%) | Zn (%) | Mn(%) | Of(%) | V (%) | Fe(%) |
| 1060 | 99.60 | 0.25 | 0.05 | 0.03 | 0.05 | 0.03 | 0.03 | 0.05 | 0.350 |
1060 aluminium alloy properties
| Mulk | Value in metric unit | Value in US unit | ||
| 1060 Aluminium alloy density | 2.705 *10³ | kg/m³ | 169 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 69 | Gpa | 10000 | ksi |
| Thermal expansion (20 ºC) | 23.6*10-6 | ºCˉ¹ | 13.1*10-6 | in/(in* ºF) |
| Specific heat capacity | 900 | J/(kg*K) | 0.215 | BTU/(lb*ºF) |
| Issiqlik o'tkazuvchanligi | 231 | W/(m*K) | 1600 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 2.81*10-8 | Ohm*m | 2.81*10-6 | Ohm*cm |
| Mustahkamlik chegarasi (tavlangan) | 69 | MPa | 10000 | psi |
| Hosildorlik kuchi (tavlangan) | 28 | MPa | 4000 | psi |
| Cho'zilish (tavlangan) | 43 | % | 43 | % |
| Shear strength (tavlangan) | 48 | MPa | 7000 | psi |
| Fatigue strength (tavlangan) | 21 | MPa | 3000 | psi |
| Qattiqlik (tavlangan) | 19 | HB | 19 | HB |
| Mustahkamlik chegarasi (H16) | 110 | MPa | 16000 | psi |
| Hosildorlik kuchi (H16) | 103 | MPa | 15000 | psi |
| Cho'zilish (H16) | 8 | % | 8 | % |
| Shear strength (H16) | 69 | MPa | 10000 | psi |
| Fatigue strength (H16) | 45 | MPa | 6500 | psi |
| Qattiqlik (H16) | 30 | HB | 30 | HB |
| Annealing temperature | 343 | ºC | 650 | ºF |
Data Sources:1060 aluminum alloy wiki
Aluminium 1060 equivalent
It is fundamentally very similar to 1050 aluminium alloy, with the difference coming down to 0.1% aluminium by weight. Biroq, while both 1050 va 1060 are covered by the same ISO standard, they are covered by different ASTM standards.
| ASTM B209 | ASTM B210 | ASTM B211 | ASTM B221 |
| ASTM B234 | ASTM B241 | ASTM B345 | ASTM B361 |
| ASTM B404 | ASTM B483 | ASTM B548 | SAE J454 |
| UNS A91060 |
Alternative names include Al99.6 and A91060. It is described in the following standards:
ASTM B 209: Standard Specification for Aluminum and Aluminum Alloy Sheet and Plate
ASTM B 210: Standard Specification for Drawn Seamless Tubing of Aluminum and Aluminum Alloys
ASTM B 211: Standard Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire
ASTM B 221: Standard Specification for Aluminum and Aluminum Alloy Extruded Rods, Rods, Wire, Shapes, and Tubes
ASTM B 483: Standard Specification for Aluminum and Aluminum Alloy Drawn Tubing for General Applications
ISO 6361: Wrought aluminum and aluminum alloy sheet, strip and plate
Packaged 1060 alyuminiy qatlam
Heat treatment process of aluminum 1060
Tez tavlanish: heating temperature 350～410℃;
According to the effective thickness of the material, the holding time is between 30 va 120 daqiqa; air-cooled or water-cooled.
Yuqori haroratli tavlanish: isitish harorati 350 ~ 500 ℃;
When the thickness of the finished product is ≥ 6mm, the holding time is 10-30 daqiqa, and when it is less than 6mm, heat it to pass; havo sovutish.
Past haroratli tavlanish: heating temperature 150~250℃; holding time 2~3h; air cooling or water cooling.
1060 aluminum alloy suppliers
Henan Huawei Aluminium Co., Ltd. focuses on the R&D and production of hot-rolled 1060 alyuminiy plitalar. 1060 aluminum sheets have high elongation, tensile strength, excellent electrical conductivity, and high formability, which can fully meet conventional processing requirements (stamping, stretching).
Huawei Aluminum’s ultra-wide and ultra-thick 1060 alyuminiy plastinka, the internal stress is eliminated, the cutting does not deform, the maximum width is 2650mm, and the maximum thickness is 500mm. It is a rare manufacturer in China that can produce ultra-wide and ultra-thick aluminum plates.
What 1060 aluminum can we provide
- 1060 alyuminiy qatlam: Kengligi(),Uzunlik(),thickness（）；
- 1060 alyuminiy lasan：
- 1060 alyuminiy tasma：
- 1060 alyuminiy folga：
- 1060 alyuminiy doira：
1060 alyuminiy doira
Characteristics of 1060 alyuminiy plastinka
- 1. The material density of 1060 aluminum plate is low, elektr o'tkazuvchanligi, issiqlik o'tkazuvchanligi, korroziyaga qarshilik, good plasticity, can be processed into plates, strips, foils and extruded products, va boshqalar., and can be welded, welded and spot welded. Standart 1060 pure aluminum sheet contains more than 99.60% alyuminiy. It belongs to the 1000 series aluminum alloy and is a commonly used flat aluminum.
- 2. The material of 1060 aluminum sheet has some good physical properties and high plasticity, which means that 1060 aluminum sheet can withstand strict mechanical processing and can be shaped according to different needs. Ajoyib korroziyaga chidamlilik.
- 3. Bunga qo'chimcha, the advantage of 1060 aluminum plate material is also used to accommodate corrosive or chemical liquids. Shuning uchun, combined with its lightweight metal properties, 1060 aluminum plate is an ideal chemical container.
- 4. Good thermal conductivity and electrical conductivity. The 1060 aluminum plate is high enough to be used in power equipment such as aluminum busbars. The conductivity of aluminum is second only to copper, and its weight is only 1/3 of that of copper.
1060 aluminum alloy applications and usage
1060 aluminum is often used in lithium battery flexible connections, shinalar, road signs, charging piles, aluminum gaskets, billboard building exterior decoration, high-rise and factory exterior decoration, office lattice decoration, lamp holders, fan blades, electronic parts, oshxona anjomlari , Reflective appliances and other fields.
 |
 |
 |
 |
- Power battery soft connection
- Aluminum for busbar
- Indoor decorations
- Curtain wall panel
1060 aluminium sheet / plate / coil / foil applications
Application of 1060 alyuminiy qatlam: battery flexible connection, bus interior decoration, avtomobil qismlari, aluminum-plastic panels, signs, lamps, wide curtain walls, bus luggage racks/floors/pattern plates (used by Yutong), va boshqalar.;
Application of 1060 medium-thick aluminum plate: aluminum busbar, automobile radiator, new energy vehicle charging pile, mold, va boshqalar.;
Application of 1060 aluminum foil coil: aluminum foil gasket, food packaging, electronic label, aluminum foil for automobile heat shield, battery foil, battery soft connection, battery ear material, battery explosion-proof valve, va boshqalar.;
1060-O state aluminum application: automotive heat shield, electronic label, battery soft connection, battery tab material, aluminum foil for battery explosion-proof valve, va boshqalar.;
Javob qoldiring