Qu'est-ce que 1060 aluminum coil grade?
1060 aluminum coil refers to a coil made of aluminum alloy 1060. 1060 aluminum coil contains 99.6% aluminium, aussi connu sous le nom 1060 pure aluminum coil. Alliage d'aluminium 1060 is a popular and widely used alloy in the 1000 série d'alliages d'aluminium.
Bobine d'aluminium 1060 has high electrical conductivity, good formability and relatively low strength, and has a wide range of applications in industry.
1060 aluminum alloy elements and content
| Alliage | Et | Fe | Cu | Mn | Mg | Zn | De | Cr | Al |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | / | 99.6 |
1060 aluiminum coil mechanical properties
| Trempe de l'alliage | Résistance à la traction | Limite d'élasticité | Élongation |
| 1060-o aluminum coil | 55 MPa (8,000 psi) | 21 MPa (3,000 psi) | 30% |
| 1060 H12 aluminum coil | 89 MPa (12,900 psi) | 83 MPa (12,000 psi) | 5% |
| 1060 H14 aluminum coil | 89 MPa (12,900 psi) | 83 MPa (12,000 psi) | 5% |
| 1060 H16 aluminum coil | 98 MPa (14,200 psi) | 90 MPa (13,000 psi) | 4% |
| 1060 H18 aluminum coil | 105 MPa (15,200 psi) | 95 MPa (13,800 psi) | 3% |
| 1060 H22 aluminum coil | 75 MPa (10,900 psi) | 65 MPa (9,400 psi) | 9% |
| 1060 H24 aluminum coil | 85 MPa (12,300 psi) | 75 MPa (10,900 psi) | 6% |
| 1060 H26 aluminum coil | 95 MPa (13,800 psi) | 85 MPa (12,300 psi) | 5% |
| 1060 H28 aluminum coil | 100 MPa (14,500 psi) | 90 MPa (13,000 psi) | 4% |
Quelles sont les caractéristiques de 1060 bobine d'aluminium?
Alliage d'aluminium 1060 is known for its special properties suitable for various applications. The following are the main properties of 1060 aluminium:
Aluminium pur: Al1060 is considered a pure aluminum alloy with a minimum aluminum content of 99.60%. It contains only small amounts of other elements, which contribute to its high conductivity and other properties.
Conductivité: One of the most notable properties of 1060 aluminum coil is its high conductivity. This makes it suitable for applications where electrical conductivity is critical, comme des fils, transmission lines and conductive materials.
Formabilité: Bobine d'aluminium 1060 has excellent formability, it can be easily bent, formed or rolled into various shapes without cracking or breaking. This characteristic makes it suitable for processes such as deep drawing, spinning and stamping.
Soudabilité: 1060 aluminum coil has good weldability and can be joined using various welding techniques, including resistance welding and fusion welding.
Résistance à la corrosion: While not as corrosion resistant as some other aluminum alloys, 1060 aluminum still has some resistance to atmospheric corrosion.
Heat dissipation: Due to its high thermal conductivity, 1060 aluminum is used in applications where heat dissipation is important. This makes it suitable for radiators and heat exchangers.
Finition de surface: 1060 aluminum coil can achieve a good surface finish, which makes it suitable for applications where appearance is important, such as reflective materials, signage and decorative elements.
Anodizing: 1060 aluminum can be anodized to improve its corrosion resistance and form a protective oxide layer on the surface.
Cost-effective: Parce que 1060 aluminum is a relatively simple alloy with a high aluminum content, it is often more cost-effective than other aluminum alloys with more complex compositions.
The properties of 1060 aluminium, including high electrical conductivity, excellent formability, weldability and heat dissipation, make it suitable for a range of applications in the electrical, electronics and general manufacturing industries.
Référence: Wikipédia;
Bobine d'aluminium 1050 contre 1060
| Article | Bobine d'aluminium 1050 | Bobine d'aluminium 1060 |
| Composition de l'alliage: | The alloy contains 99.5% aluminium pur, one of the purest aluminum alloys commercially available. Very soft and has excellent corrosion resistance. | 1060 is similar to 1050, et 1060 aluminum alloy is also composed of 99.6-99.7% aluminium pur. It is also part of the commercial pure aluminum group and shares many of the same properties as 1050. |
| Force | : Les deux 1050 et 1060 aluminum alloys have relatively low strength compared to other aluminum alloys. They are often used in applications where strength is not a primary requirement. | |
| Formabilité | Les deux 1050 et 1060 alloys have excellent formability and are suitable for various forming processes such as rolling, extrusion and drawing. | |
| Soudabilité | Both alloys have good weldability and can be easily joined using various welding techniques. | |
Laisser une réponse