Ce este 1060 aliaj de aluminiu

1060 aluminum alloy contains 99.6% aluminiu, which belongs to industrial pure aluminum and is a representative product of 1000 aliaj de aluminiu de serie.

1060 aliaj din aluminiu

1060 aluminum material is formed by pure aluminum plus a small amount of copper elements. It has high plasticity, rezistență la coroziune, conductivitate electrică și conductivitate termică, but its strength is low, heat treatment cannot be strengthened, and its machinability is not good; it can be welded by gas welding, hydrogen atom welding and Contact welding, nu este ușor de lipit; ușor de rezistat la diferite prelucrări și extindere, îndoire.

The production process of 1060 aluminum sheet/coil is relatively simple, tehnologia este relativ matura, and the price has a huge advantage over other high-grade alloy aluminum sheets. With good elongation and tensile strength, it can fully meet the conventional processing requirements (stamping, întinderea) and high formability.

Common product types of 1060 aliaj de aluminiu

1060 tabla de aluminiu	1060 bobina de aluminiu	1060 bandă de aluminiu	1060 cerc de aluminiu	1060 folie de aluminiu

1060 aluminum alloy is widely used in products that do not require high strength, such as billboards, building exterior decoration, bus body, chemical instruments, piese de prelucrare a tablei, deep-drawing or rotating concave containers, piese de sudura, schimbătoare de căldură, watch surfaces And disk surfaces, plăcuțe de identificare, ustensile de bucatarie, decoratiuni, aparate reflectorizante, etc.

What is the meaning of 1060 H14

1060 represents the alloy composition, which can be considered as the grade of aluminum;

H14 is the heat treatment state of the aluminum alloy. The same alloy composition has different heat treatment states, and its mechanical properties are different;

1060 h14 aluminium alloy coil

Aluminiu 1060 compoziție chimică

1060 aluminium alloy chemical composition

Aliaj	Al(%)	Si (%)	Cu (%)	Mg(%)	Zn (%)	Mn(%)	De(%)	V (%)	Fe(%)
1060	99.60	0.25	0.05	0.03	0.05	0.03	0.03	0.05	0.350

1060 aluminium alloy properties

1060 aluminium alloy properties

Proprietate	Value in metric unit		Value in NE unit
1060 Aluminium alloy density	2.705 *10³	kg/m³	169	lb/ft³
Modulus of elasticity	69	GPa	10000	ksi
Thermal expansion (20 ºC)	23.6*10-6	ºCˉ¹	13.1*10-6	in/(in* ºF)
Capacitate termică specifică	900	J/(kg*K)	0.215	BTU/(lb*ºF)
Conductivitate termică	231	cu(m*K)	1600	BTU*in/(hr*ft²*ºF)
Electric resistivity	2.81*10-8	Ohm*m	2.81*10-6	Ohm*cm
Rezistență la tracțiune (recoaptă)	69	MPa	10000	psi
Rezistenta la curgere (recoaptă)	28	MPa	4000	psi
Elongaţie (recoaptă)	43	%	43	%
Shear strength (recoaptă)	48	MPa	7000	psi
Forța la oboseală (recoaptă)	21	MPa	3000	psi
Duritate (recoaptă)	19	HB	19	HB
Rezistență la tracțiune (H16)	110	MPa	16000	psi
Rezistenta la curgere (H16)	103	MPa	15000	psi
Elongaţie (H16)	8	%	8	%
Shear strength (H16)	69	MPa	10000	psi
Forța la oboseală (H16)	45	MPa	6500	psi
Duritate (H16)	30	HB	30	HB
Annealing temperature	343	ºC	650	ºF

Data Sources:1060 aluminum alloy wiki

Aluminiu 1060 equivalent

It is fundamentally very similar to 1050 aliaj din aluminiu, with the difference coming down to 0.1% aluminium by weight. in orice caz, while both 1050 și 1060 are covered by the same ISO standard, they are covered by different ASTM standards.

ASTM B209	ASTM B210	ASTM B211	ASTM B221
ASTM B234	ASTM B241	ASTM B345	ASTM B361
ASTM B404	ASTM B483	ASTM B548	SAE J454
UNS A91060

Alternative names include Al99.6 and A91060. It is described in the following standards:

ASTM B 209: Standard Specification for Aluminum and Aluminum Alloy Sheet and Plate

ASTM B 210: Standard Specification for Drawn Seamless Tubing of Aluminum and Aluminum Alloys

ASTM B 211: Standard Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire

ASTM B 221: Standard Specification for Aluminum and Aluminum Alloy Extruded Rods, Rods, Wire, Shapes, and Tubes

ASTM B 483: Standard Specification for Aluminum and Aluminum Alloy Drawn Tubing for General Applications

ISO 6361: Wrought aluminum and aluminum alloy sheet, strip and plate

Packaged 1060 tabla de aluminiu

Heat treatment process of aluminum 1060

Recoacere rapidă: heating temperature 350～410℃;

According to the effective thickness of the material, the holding time is between 30 și 120 minute; air-cooled or water-cooled.

Recoacere la temperaturi ridicate: temperatura de încălzire 350~500℃;

When the thickness of the finished product is ≥ 6mm, the holding time is 10-30 minute, and when it is less than 6mm, heat it to pass; răcire cu aer.

Recoacere la temperaturi joase: heating temperature 150~250℃; holding time 2~3h; air cooling or water cooling.

1060 aluminum alloy suppliers

Henan Huawei Aluminium Co., Ltd. focuses on the R&D and production of hot-rolled 1060 foi de aluminiu. 1060 aluminum sheets have high elongation, tensile strength, excellent electrical conductivity, and high formability, which can fully meet conventional processing requirements (stamping, întinderea).

Huawei Aluminum’s ultra-wide and ultra-thick 1060 placa de aluminiu, the internal stress is eliminated, the cutting does not deform, the maximum width is 2650mm, and the maximum thickness is 500mm. It is a rare manufacturer in China that can produce ultra-wide and ultra-thick aluminum plates.

What 1060 aluminum can we provide

• 1060 tabla de aluminiu: Lăţime(),Lungime(),thickness（）；
• 1060 bobina de aluminiu：
• 1060 bandă de aluminiu：
• 1060 folie de aluminiu：
• 1060 cerc de aluminiu：

1060 cerc de aluminiu

Characteristics of 1060 placa de aluminiu

• 1. The material density of 1060 aluminum plate is low, conductivitate electrică, conductivitate termică, rezistență la coroziune, good plasticity, can be processed into plates, strips, foils and extruded products, etc., and can be welded, welded and spot welded. Standard 1060 pure aluminum sheet contains more than 99.60% aluminiu. Acesta aparține 1000 series aluminum alloy and is a commonly used flat aluminum.
• 2. The material of 1060 aluminum sheet has some good physical properties and high plasticity, which means that 1060 aluminum sheet can withstand strict mechanical processing and can be shaped according to different needs. Rezistență excelentă la coroziune.
• 3. în plus, the advantage of 1060 aluminum plate material is also used to accommodate corrosive or chemical liquids. Prin urmare, combined with its lightweight metal properties, 1060 aluminum plate is an ideal chemical container.
• 4. Good thermal conductivity and electrical conductivity. The 1060 aluminum plate is high enough to be used in power equipment such as aluminum busbars. The conductivity of aluminum is second only to copper, and its weight is only 1/3 of that of copper.

1060 aluminum alloy applications and usage

1060 aluminum is often used in lithium battery flexible connections, bare colectoare, road signs, charging piles, aluminum gaskets, billboard building exterior decoration, high-rise and factory exterior decoration, office lattice decoration, lamp holders, fan blades, electronic parts, ustensile de bucatarie , Reflective appliances and other fields.

• Power battery soft connection
• Aluminum for busbar
• Indoor decorations
• Curtain wall panel

1060 aluminium sheet / plate / coil / foil applications

Application of 1060 tabla de aluminiu: battery flexible connection, bus interior decoration, piese auto, aluminum-plastic panels, signs, lamps, wide curtain walls, bus luggage racks/floors/pattern plates (used by Yutong), etc.;

Application of 1060 medium-thick aluminum plate: aluminum busbar, automobile radiator, new energy vehicle charging pile, mold, etc.;

Application of 1060 aluminum foil coil: aluminum foil gasket, ambalarea produselor alimentare, electronic label, aluminum foil for automobile heat shield, battery foil, battery soft connection, battery ear material, battery explosion-proof valve, etc.;

1060-O state aluminum application: automotive heat shield, electronic label, battery soft connection, battery tab material, aluminum foil for battery explosion-proof valve, etc.;