Ho senya matla le ho se tšoane le sehlopha sa marine 5086 H116 Plates Plates
Aluminium Alloys e fetohile ea bohlokoa haholo ho indasteri e ngata, haholoholo moo matla, khanyetso ea kutu, le thepa e bobebe ea mahlo e bohlokoa. Har'a tsena, Sehlopha sa marine 5086 H116 Plates Plates e qala ka lebaka la ts'ebetso ea bona e ikhethang, ho ba etsetsa khetho e ratoang marie, koloi, kaho, le lits'ebetso tsa indasteri.
Tataiso ena e felletseng e hlahloba thepa e rarahaneng, lits'ebetso, le melemo e bapisang ea 5086 H116 Plates Plates, Ho fana ka maikutlo a lerato ho data ea saense, ts'ebeliso e sebetsang, le litekanyetso tsa indasteri.
Kenyelletso ea sehlopha sa marine 5086 H116 Plates Plates
Sehlopha sa marine 5086 Aluminium ke ea 5000 letoto la lisebelisoa tsa aluminium, e tšoauoa haholo-holo ke ho hanyetsa haholo, Matla a itekanetseng, le ho sa hlakoeng bo ikhethang.
Ha ho etsoa mocheso ho H116, Litlhaka tsee li bontša mekhoa e ntlafalitsoeng, sebopehong, le ho qetela, ho etsa hore ba tšoanele ho bona libaka tsa metsing.
Litšobotsi Tsa sehlooho
| Tšobotsi | Tlhaloso |
|---|---|
| Alloy Series | 5052, 5083, 5086, 5005 |
| Khalefo | H116 |
| Botenya | 2.66 g/cm³ |
| Melting Point | 582°C (1080°F) |
| Matla a tloaelehileng a Tension | 260 – 330 MPa (37,700 – 47,900 psi) |
| Kotulo Matla | 130 – 200 MPa (18,850 – 29,010 psi) |
| Khanyetso ea Corrosion | E ikhethang libakeng tsa leoatle tsa leoatle |
| Boikemisetso | E ntle |
| Ho nepahala | E kgabane |
Sebopeho le likokoana-hloko tsa 5086 H116 Plates Plates
Ho utloisisa sebopeho sa microscopic le lik'hemik'hale tsa lik'hemik'hale tsa 5086 H116 Aluminium e nyatsa ho utloisisa litšobotsi tsa eona tsa ts'ebetso.
Sebopeho sa Lik'hemik'hale
| Element | Litaba (%) | Karolo e sebetsang |
|---|---|---|
| Magnesium (Mg) | 4.0 – 4.9 | Element ea mantlha ea motho; E ntlafatsa matla le ho hanyetsa ha ho tsitsipana |
| Manganese (Mong) | 0.20 – 0.70 | E ntlafatsa mathata le ho hanyetsa ho hanyetsa |
| Chromium | 0.05 – 0.25 | E eketsa ho hanyetsa le matla |
| Silicone | ≤ 0.40 | E ntlafatsa ho leleka le mechine |
| Tšepe | ≤ 0.70 | E ama matla a matla le a tsamaiso |
| Lintlha Tse Ling | Chelete e ngata | Tšusumetso e nyane |
Likarolo tsa likokoana-hloko
Li-microsinur tsa alloy e na le likarolo:
- Aluminium Matrix: E fana ka motheo, e feto-fetohang le e bobebe.
- Magnesium-RichMallics: Kenya letsoho ho matla a phahameng.
- Likarolo tse loantšana: E thehiloe ka tlhaho ka lebaka la lintho tse etsahalang, haholo-holo magnesium le manganese, e khothalletsang mokhoa oa ho fetisa metsi a leoatle.
Thepa ea mochini le data ea ts'ebetso
Litšobotsi tsa mochini oa 5086 H116 Plates e bohlokoa ke ea bohlokoa bakeng sa ho lekola ho ba le boikarabello ba lits'ebeletso tse fapaneng.
| Thepa | Tloaelehileng | Lenaneo la liteko | Lintlha |
|---|---|---|---|
| Matla a ho qetela a Tensile (Ut) | 260 – 330 MPa | ASTM B209 | Netefatsa boemo bo phahameng ba ho beoa |
| Kotulo Matla (0.2% offset) | 130 – 200 MPa | ASTM B209 | E bonts'a ntlha ea sets'oants'o sa polasetiki |
| Elongation at Break | 10 – 20% | ASTM B209 | E bonts'a khatello ea maikutlo |
| Ho thatafala (Brinell) | 60 – 70 HB | Asst B644 | E bonts'a bokaholimo ba ho senya |
| Meeli ea Tekanyo | Phahameng | – | E loketse libaka tsa marang-rang tsa cyclic |
Hlokomela: Melao ena e susumetsoa ke ts'ebetso ea ho etsa lintho, Bula, le kalafo e ikhethang ea bohale.
Khanyetso ea Corrosion: Sekhooa sa likopo tsa metsing
E 'ngoe ea mabaka a mantlha a ho khetha sehlopha sa metsing 5086 H116 Pletate ea Aluminium libakeng tsa Marine ke khanyetso ea bona e ikhethang ho lijalo tsa metsi a leoatle.
Mechini ea Ts'ireletso ea Corrosance
- Passive Oxide Laker: Litaba tsa Magnesiumy li matlafatsa mokhoa o potlakileng.
- Kotsi ea likokoana-hloko: Microtiki e unsiform e fokotsa lijalo tsa lehae tsa lehae.
Lintlha tsa Molao
| Tikoloho | Sekhahla sa Corrosion (mm / selemo) | Ho bapisoa le aloys tse ling |
|---|---|---|
| Metsi a leoatle (Letsoai 35 PPT) | 0.03 – 0.05 | Haholo tlase ho feta 5052 kapa 5059 metsoako |
| Metsi a Macha | E ke keng ea hlalosoa | Optimal bakeng sa ho tšoarella nako e telele |
| Teko ea Spray (Astm b117) | Ha ho na mokhopi o bonahalang kamora 2000 lihora | E bontša ho hanyetsa e phahameng |
Meetso le thepa ea mamati
sehlopha sa marine 5086 H116 Plate ea Aluminium Plate e tummeng bakeng sa ho phomola ha bona, e bohlokoa bakeng sa tlhahiso e kholo.
Ho nepahala
| Mokhoa | KAMOO | Litlhaloso |
|---|---|---|
| Khohlo ea likhoele tsa khase erc welding (Gtaw) | E kgabane | E hlahisa boima bo phahameng ba boleng bo holimo ka ho khopana ho fokolang |
| Metal Arc Welding (Gawn) | E ntle | E loketse lipalamo tse teteaneng |
| SHICTED STERD ARC WADing (Smaw) | E amohelehang | E hloka pele- le kalafo ea ka morao |
Litšobotsi tsa mochini
- Ho itšeha: E fihlella metheong e nang le sebopeho se fokolang sa burr.
- Ho cheka: E tsitsitseng, Ka bophelo bo botle ba sesebelisoa.
- Ho khumama & Ho theha: Ho Fumatleha Hacconity ho H116 Tela e tsamaisang libopeho tse rarahaneng.
Ho qeta
Lipampiri li ka pola kapa li ne li kopantsoe ho ntlafatsa li-aesthetics le ho hanyetsa, Ho bohlokoa haholo bakeng sa lits'ebetso tsa metsing le ho khabisa.
Tlhahlobo e patehileng: 5086 H116 Vs. Tse ling tsa marine Aluminium Alloys
Ho utloisisa melemo ea 5086 H116 e hloka ho e bapisa le li-alloys tse tšoanang.
| Tšobotsi | 5086/H116 | 5052/H32 | 6061/T6 |
|---|---|---|---|
| Khanyetso ea Corrosion | E kgabane | E ntle | E itekanetseng |
| Matla | Phahameng | E itekanetseng | E itekanetseng |
| Weldability | E kgabane | E ntle | E ntle |
| Boikemisetso | E ntle | E lokileng | E lokileng |
| Litšenyehelo | E itekanetseng | Tlase | Phahameng |
Hlokomela: Khetho e itšetlehile ka litlhoko tse ikhethang tsa kopo, ka 5086 H116 ho phahamela ho loantšana le matla a ho sebelisa melao ea metsing.
Lisebelisoa tsa indasteri le lithuto tsa linyeoe
Thepa e ikhethileng ea sehlopha sa metsing 5086 H116 Mahalataiti ea H116 Plate e nolofatsa tlhahiso ea bona ho likarolo tse fapaneng.
Indasteri ea metsing
- Kaho ea likepe: Hulls, mekato, meaho e meholo.
- Ho etsa lintho ka sekepe: Rigid liketsoana tse thata, Lijana tsa feshene.
- Meaho ea Offshore: Li-Platft, liphaephe.
Likoloi tsa likoloi
- Litanka tsa mafura, Metsoako ea sebopeho moo ho hanyetsa ho hanyetsa ho tšoaea liphoso.
Kaho & Architha
- Li-coudwals tse kopaneng, mekhabiso ea mekhabiso, marokho.
Lisebelisoa tsa Indasteri
- Likepe tsa khatello, litanka tsa polokelo.
Thuto ea Case: Kaho ea metsing ea metsing
Sets'oants'o se etelletseng pele se sebelisitsoeng 5086 Li-plates tsa H116 tsa ho aha jara e 50-limithara tse 50. Melemo e kenyelelitsoe:
- Ho tšoarella: Tlhokomeliso e fokotsehileng ka lebaka la ho hanyetsa.
- Ho boloka boima ba 'mele: E Ntsetse Pele Moetsi ea Khahla Moeeng.
- Ho ba Tšepahala Hahatsana: Matla a phahameng a mabotho a phahameng a ile a qala polokeho ka lebaka la leoatle le thata.
Kholiseho ea boleng le litekanyetso
Ho latela melao ea machabeng ho netefatsa ts'ebetso le polokeho ea 5086 / h116 lilate tsa aluminium.
| Standard | Boholo | TLHOKOMELISO |
|---|---|---|
| ASTM B209 | Aluminium le aluminum-allony pampiri le poleiti | Litlhaloso tsa lintho tse bonahalang |
| Asst B644 | Aluminium Alloys, Khalefo, le maemo | Thepa le lithunya |
| ISO 6361 | Aluminium le aluminium Alloys - Sheet, Letlapa, le bara e roll | Khokahano ea machabeng |
Kholiseho ea boleng e kenyelletsa:
- Tlhahlobo ea lik'hemik'hale ea lik'hemik'hale
- Liteko tsa mochini
- Netefatso ea ho ikhula ea Cyrosion
- TLHOKOMELISO E SE ETSANG (Ndt)
Sebaka sa Topollo ea Morekisi: Huawei Aluminium
Huawei Aluminium, moetsi oa moetsi oa lefatše oa tlhaho, Phepelo ea boleng bo holimo 5086 H116 li-plates tsa aluminium ka taolo ea boleng bo sa fetoheng le litheko tsa tlholisano.
Mmuso oa bona oa tlhahiso o kenyelletsa ho roka ho hatela pele, Ho futhumala, le lits'ebetso tsa ho qeta, Ho netefatsa hore li-Product li kopana le litekanyetso tsa machabeng tse kang Astm le Iso.
Hobaneng u khetha aluminium ea HUawei?
- Khopolo e Phelang e Tšepahalang: Lits'oants'o tse ntle tsa nako.
- Boholo ba tloaelo & Botenya: Ho feto-fetoha le maemo ho kopana le litlhoko tse khethehileng tsa projeke.
- Tšehetso ea tekheniki: Tlhahlobo ea litsebi tsa khetho ea boitsebiso le lesela.
- Setifikeiti: ISO 9001, ISO 14001, le tse netefatsang tsa indasteri ea indasteri.
Mehopolo e Molemo Bakeng sa Khetho ea Boitsebiso
Ha u etsa qeto ho li-plate tse 5086 / h116, Nahana:
- Tikoloho ea kopo: Marine, Liindasteri, kapa ho khabisa.
- Mojaro oa sebopeho: Ho netefatsa thepa ea mechini e kopanang le litlhoko tsa mojaro.
- Ho rarahana: Ho tsamaisana le bo-mme ba ho etsa mosebetsi o teng.
- Liponche tse theko e boima: Ts'ebetso ea ho lekanngoa le tekanyetso.
- Nako e telele & Tlhokomelo: Litšenyehelo tse lebelletsoeng tsa bophelo le tsa tlhokomelo.
Li-FAQ
1. Se etsahalang 5086 H116 plates plates e loketse libaka tsa metsing?
Li-vushene tsa Magnaimium tsa Alloy li hlohlelletsa filimi e sirelletsang ea oxide e hanang sejalo sa leoatle, Ha moea oa H116 o ntlafatsa matla le ho ba le matla, e etsa hore e be e loketseng lits'ebetso tsa mangoane moo ho lumellanang ho hlokahalang.
2. Matla a ho fapanyetsana 5086 / h116 a bapisoa le a mang a marine a aloy?
5086/H116 e fana ka matla a phahameng a phahameng (ho fihlela 330 MPa) ho feta 5052 (ho potoloha 210 MPa) le 5059, Ho fana ka tšehetso e phahameng ea ho hlophisa libaka tse batlang.
3. Ka 5086 H116 Plates e ka ba bonolo?
Ee, ka mekhoa e loketseng ea ho phomola e kang gtaw kapa gmaw, 5086 H116 plates Sard hantle, Ho boloka tsitsipano tsa bona tsa ho tsitsipana le thepa ea mecha.
4. Likhetho tse tloaelehileng tsa ho qetela tsa lipoleiti tsena ke eng?
Polish, anodizing, le pente li tloaelehile, ho ntlafatsa boipiletso ba botle le ts'ireletso ea li-carrosion.
5. Litšenyehelo tsa 5086 / h116 li bapisoa le li-alloys tse ling tsa aluminium?
Ha e ntse e theko e tlase haholo ho feta 5052 kapa 5059, Litsenyehelo li lokeloa ke tsitsipano ea eona e phahameng le matla a eona, haholo-holo libakeng tsa metsing.
Sephetho
Tlhokahalo e tsoelang pele ea ho tšoarella, e bobebe, le lisebelisoa tse thibelang li-corronion li ntse li tsoela pele ho tseba botle ba 5086 H116 Plates Plates.
Tsoelo-pele lits'ebetsong tsa tlhahiso, joalo ka mekhoa e ntlafalitsoeng e ntlafalitsoeng le e kholisang, ba ntlafalitse mettoro ea bona ea ts'ebetso.
Khetho ea Malebela a thepa joalo ka 5086 H116 Plates Plates, Ho tšehetsoa ke ho ts'epahala ho thata le ho ba le tšekamelo ea mofani oa Huawei le ho netefatsa hore indasteri e ka fihlela ts'ebetso ea bona, Tšireletseho, Lekane e tsitsitseng.
Tlhahlobo ena e qaqileng e hatisa matla a makatsang, khanyetso ea kutu, le tse sitisoang ke sehlopha sa Marine 5086 H116 Plates Plates.
Ts'ebetso ea eona ea netefatso ea ho batla likopo e hatisa karolo ea eona ea bohlokoa boenjiniere le ho etsa lintho, ho tšepisa le ho sebetsa ka mokhoa o hlakileng bakeng sa lilemo tse tlang.
Khoasolla PDF：Khoasolla
Tlohela Karabo