Standard: GB/T 6893-2000
●1050 aluminium motsoako oa lik'hemik'hale:

Aluminium Al: 99.50
Silicon E: ≤0.25
Koporo Cu: ≤0.05
Magnesium Mg: ≤0.05
Zinc Zn: ≤0.05
Manganese Mn: ≤0.05
Titanium Ti: ≤0.03
Vanadium V: ≤0.05
Tšepe Fe: 0.000hoo e ka bang 0.400
Hlokomela: motho a le mong ≤0.03

● Thepa ea mochine 1050 motsoako oa aluminium:

Matla a tsitsitseng σb (MPa): ≥95
Hlokomela: thepa ea mechine ea liphaephe ka mocheso oa kamore
Boholo ba Mohlala: Botenya bohle ba Lebota

● 1050 aluminium alloy litšobotsi le boholo ba kopo:

Motsoako oa aluminium 1050 ke aluminium e hloekileng ea indasteri e nang le polasetiki e phahameng, khanyetso ea kutu, motlakase le conductivity ea mocheso, empa
Matla a fokolang, mocheso kalafo ke ke matlafatsa machinability ha e ntle; ho cheseletsa khase, tjheseletsa ea athomo ea haedrojene le ho tjheseletsa ho kopana, ha ho bonolo ho qhekella
Welding; ho bonolo ho mamella ts'ebetso e fapaneng ea khatello le katoloso, kobeha.

● Alloy 1050 litlhaloso tsa phekolo ea mocheso oa aluminium:

1) Ho tlatsa ka botlalo: mocheso ho 390-430°C; ho itšetlehile ka botenya bo sebetsang ba thepa, nako ea ho tšoara ke 30-120min;
Pholisa ka sebōpi ka lebelo la 30-50°C/h ho ea ho 300°C, ebe moea o pholile.
2) Ho koenya ka potlako: mocheso ho 350-370°C; ho itšetlehile ka botenya bo sebetsang ba thepa, nako ea ho tšoara ke 30-120min;
Moya kapa metsi a phodileng.
3) Ho tima le ho tsofala: Ho tima mocheso ho 500-510 ° C, phodiso ya moya; botsofali ba maiketsetso ho 95-105°C, 3h, phodiso ya moya; botsofali ba tlhaho
Mocheso o sebetsang oa kamore 120h
Naha: aluminium le motsoako oa aluminium li huleloa (rolled) phala e se nang moroalo (Boemo ba H14)
1050Motsoako oa aluminium Lebitso la khale: L3
Standard: GB/T 4437.1-2000

●1050A aluminium motsoako oa lik'hemik'hale tsa lik'hemik'hale:

Silicon E: 0.25
Tšepe Fe: 0.40
Koporo Cu: 0.05
Magnesium Mg: 0.05
Zinc Zn: 0.07
Manganese Mn: 0.05
Titanium Ti: 0.05
Aluminium Al: 99.50
Hlokomela: Motho a le mong: 0.05

● Thepa ea mochine 1050a aluminium motsoako:

Matla a tsitsitseng σb (MPa): 60～100
Elongation δ10 (%): ≥23
Elongation 50mm/(%): ≥25

● Litšobotsi le boholo ba ts'ebeliso:

Aluminium e hloekileng ea indasteri e na le litšobotsi tsa polasetiki e phahameng, khanyetso ea kutu, motlakase le conductivity ea mocheso, empa matla a yona a tlase mme ha a yo
E ka matlafatsoa ke phekolo ea mocheso, ho se sebetse hantle; tjheseletsa e amohelehang ya kgokahanyo, ho cheseletsa khase