Learn more about 8021 aluminium foil
“8021 aluminium foil” refers to 8021 alloy aluminum foil, which is a more common alloy type in the 8000 letoto. 8021 alloy is a common type of aluminum alloy with high strength and plasticity. Aluminium foil 8021 is a thin sheet made of pure aluminum, which has good flexibility, thermal conductivity and electrical conductivity. It is widely used in food packaging, sephutheloana sa meriana, battery casing, thermal insulation materials and other fields.
What is the composition of 8021 alloy aluminum foil?
The main components of 8021 aluminum alloy include alloy additions of aluminum (Al), koporo (Cu) and a small amount of other elements.
| 8021 aluminum foil chemical element content table (%) | |||||||||
| Alloy | Al | Fe | Le | Cu | Mong | Mg | Sn | B | Ba bang |
| 8021 | 96.8-98.2 | 0.7 | 0.65 | 1.2-1.8 | 0.15 | 0.01 | 0.05 | 0.05 | 0.15 |
Mechini thepa ea 8021 lihlahisoa tsa aluminium foil
| Alloy Temper | Matla a tšepe | Ho hlahisa matla | Elongation | Melting point | Thermal conductivity | Botenya |
| 8021 O foil ea aluminium | ≥80MPa | ≥40MPa | ≥25% | 660°C | 237 W/(m·K) | 2.70 g/cm³ |
| 8021 H12 aluminium foil | 110-145 MPa | ≥75 MPa | ≥3% | |||
| 8021 H14 aluminium foil | 130-175 MPa | ≥115 MPa | ≥2% | |||
| 8021 H16 aluminium foil | 150-185 MPa | ≥135 MPa | ≥2% | |||
| 8021 H18 aluminium foil | ≥185 MPa | ≥170 MPa | ≥2% | |||
| 8021 H22 aluminium foil | 130-165 MPa | ≥115 MPa | ≥3% | |||
| 8021 H24 aluminium foil | 150-180 MPa | ≥135 MPa | ≥2% |
8021 aluminum foil as pharmaceutical packaging
8021 aluminum foil has good mechanical properties and can be used as a pharmaceutical packaging material.
| Tlhaloso | Range |
|---|---|
| Botenya | 0.02mm – 0.2mm |
| Bophara | 200mm – 1600mm |
| Ho thatafala | O, H14, H18 |
| Roll Diameter | 200mm – 600mm |
| Surface Treatment | One side bright, possibly with coatings, lubricants, or printing |
8021 aluminum foil as food packaging
| Tlhaloso | parameters |
|---|---|
| Botenya | 0.02mm – 0.2mm |
| Bophara | 200mm – 1600mm |
| Ho thatafala | O, H12, H14, H16, H18 |
| Roll Diameter | 200mm – 600mm |
| Surface Treatment | One side bright, possibly with coatings or printing |
8021 alloy as a specification for battery foil
| Tlhaloso | parameters |
|---|---|
| Alloy | 8021 |
| Khalefo | O (bonolo) |
| Botenya | 0.015mm – 0.05mm |
| Bophara | 100mm – 1000mm |
| Surface Treatment | One side bright, possibly with coatings or treatments |
| Matla a tšepe | 60 MPa – 120 MPa |
| Elongation | 20% – 30% |
| Motlakase Conductivity | E kgabane |
8021 aluminium foil density
The density of aluminum foil can vary slightly depending on its thickness and manufacturing process. As a general guideline, the density of aluminum is approximately 2.70 g/cm³ or 2700 kg/m³. 8021 aluminum foil is usually very thin, often less than 0.2 mm (200 microns) tenya, and its density is close to that of pure aluminum.
8021 aluminum foil melting point
Sebaka se qhibilihang sa 8021 aluminum foil is the same as that of pure aluminum because 8021 is an alloy mainly composed of aluminum. The melting point of pure aluminum is approximately 660.3 likhato tsa Celsius (1220.5 degrees Fahrenheit).
8021 aluminium foil vs 8011 aluminium foil
8021 le 8011 aluminum foils are similar in many ways as they both belong to the 8xxx series of aluminum alloys commonly used in a variety of packaging applications.
| Thepa | 8021 Aluminium Foil | 8011 Aluminium Foil |
|---|---|---|
| Sebopeho sa Alloy | Primarily aluminum with some alloying elements | Primarily aluminum with some alloying elements |
| Alloy Series | 8xxx (8xxx indicates aluminum alloy series) | 8xxx (8xxx indicates aluminum alloy series) |
| Common Thickness Range | 0.018-0.2 mm (18-200 micrometers) | 0.009-0.2 mm (9-200 micrometers) |
| Typical Use | Pharmaceutical packaging, phuthelo ya dijo, le ho feta | Ho paka lijo, tshebediso ya lelapa, le ho feta |
| Strength and Durability | Generally good strength and durability | Generally good strength and durability |
| Barrier Properties | Excellent barrier properties, suitable for protecting sensitive products | Good barrier properties, adequate for most packaging needs |
| Surface Finish | Smooth surface finish | Smooth surface finish |
| Surface Treatment | Usually coated or laminated for specific requirements | Coated or laminated for specific requirements |
| Khalefo | E bonolo, half-hard, and hard temper available | E bonolo, half-hard, and hard temper available |
| Melting Point | Approximately 660.3°C (1220.5°F) | Approximately 660.3°C (1220.5°F) |
| Matla a tšepe | Varies with temper and thickness | Varies with temper and thickness |
| Typical Temperatures for Use | Can be used at room temperature, refrigeration, and moderate oven temperatures | Can be used at room temperature, refrigeration, and moderate oven temperatures |
Tlohela Karabo